Contribute
Register

HELP: MacOS Big Sur on Skylake Desktop PC

Status
Not open for further replies.
Feartech said:
also if you have set DVMT to 64MB in your bios, you can remove these entries:
Code: 
<key>framebuffer-fbmem</key>
                <data>AACQAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-unifiedmem</key>
                <data>AAAAgA==</data>

also if you do not have a broadcom wifi card, then remove these:
Code: 
<dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>BrcmBluetoothInjector.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string></string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
            <dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>BrcmFirmwareData.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string>Contents/MacOS/BrcmFirmwareData</string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
            <dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>BrcmPatchRAM3.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string>Contents/MacOS/BrcmPatchRAM3</string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
Click to expand...
Where do I remove these?
 
Do I also remove:
"
</data>
<key>model</key>
<string>Intel HD 530 Graphics</string>
"
 
madazzle said:
Do I also remove:
"
</data>
<key>model</key>
<string>Intel HD 530 Graphics</string>
"
Click to expand...
no, keep that

also i noticed your lilu.kext and whatevergreen.kext are quite old, download newer versions
 
Feartech said:
no, keep that

also i noticed your lilu.kext and whatevergreen.kext are quite old, download newer versions
Click to expand...
Alright, removed all of that dict's now I'll update the kexts do I need to change anything or do I just replace them?
 
Also what are Dsym Files are they important?
 
madazzle said:
Alright, removed all of that dict's now I'll update the kexts do I need to change anything or do I just replace them?
Click to expand...
just replace the kexts

no need to do anything with dsym files
 
madazzle said:
alright done what should I do next?
Click to expand...
bios:

Disable:
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
VT-d (can be enabled if you set DisableIoMapper to YES)
CSM
Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)

Enable:
VT-x
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode
DVMT Pre-Allocated(iGPU Memory): 64MB
SATA Mode: AHCI

confirm you have physically removed your nvidia card from your machine

reset nvram and try booting
 
Feartech said:
bios:

Disable:
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
VT-d (can be enabled if you set DisableIoMapper to YES)
CSM
Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)

Enable:
VT-x
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode
DVMT Pre-Allocated(iGPU Memory): 64MB
SATA Mode: AHCI

confirm you have physically removed your nvidia card from your machine

reset nvram and try booting
Click to expand...
alright m8
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top