- Joined
- Oct 16, 2012
- Messages
- 10
- Motherboard
- Acer Aspire V5-171 6832 (Clover 4411)
- CPU
- i3 2377m HM77
- Graphics
- HD 3000 1366x768
- Mac
- Mobile Phone
After a long time without practicing a Hackintosh installation, I came back active to install on my laptop.
I tried with Sierra 10.12 but I had a lot of errors.
I was successful with the 10.13 High Sierra version.
My hardware is compatible, I did some research and I saw several cases of success.
I've been trying for 15 days, and I've decided to ask for help here in the forum.
My problem is still the graphics, I have 15 days with this problem and I can not solve!!!
I am not advanced in Hackintosh, I already installed some versions since 10.5.4, but in the old versions the process was different for the drivers ...
I try many different guides, but no works.
For now,
I followed all the guide steps in the "pos-install" part, made the adaptations in my config.plis on the "efi / clover" volume according to the config_HD3000_1366x768_7series.plist from Rehabman (Thanks Rehabman).
After editing my plist with some parameters of this Rehabman .plis file, I rebooted the system and got the following errors:
After the issues I made in my .plist file (efi / colver) by joining parts of these two .plists files, I had these errors and did not start. I had to return my old .plist (efi / clover) to return to normally start the High Sierra.
I'm going to post my .plist file (I use Legacy Mode Clover) located in EFI / EFI / Clover.
If someone can get some solution to make my HD 3000 HM77 128MB graphic work on this Acer, it would be a great help, forever grateful!
.
Thanks 4 all !
I tried with Sierra 10.12 but I had a lot of errors.
I was successful with the 10.13 High Sierra version.
My hardware is compatible, I did some research and I saw several cases of success.
I've been trying for 15 days, and I've decided to ask for help here in the forum.
My problem is still the graphics, I have 15 days with this problem and I can not solve!!!
I am not advanced in Hackintosh, I already installed some versions since 10.5.4, but in the old versions the process was different for the drivers ...
I try many different guides, but no works.
For now,
I followed all the guide steps in the "pos-install" part, made the adaptations in my config.plis on the "efi / clover" volume according to the config_HD3000_1366x768_7series.plist from Rehabman (Thanks Rehabman).
After editing my plist with some parameters of this Rehabman .plis file, I rebooted the system and got the following errors:
After the issues I made in my .plist file (efi / colver) by joining parts of these two .plists files, I had these errors and did not start. I had to return my old .plist (efi / clover) to return to normally start the High Sierra.
I'm going to post my .plist file (I use Legacy Mode Clover) located in EFI / EFI / Clover.
If someone can get some solution to make my HD 3000 HM77 128MB graphic work on this Acer, it would be a great help, forever grateful!
.
Thanks 4 all !