- Joined
- Jan 21, 2016
- Messages
- 30
- Motherboard
- Acer A515-51-592H (Clover)
- CPU
- Intel Core-i5 8250U (100-Series)
- Graphics
- Intel UHD 620 (1080p)
- Mobile Phone
Hi,
to cut a long story short: HDMI isn't working with my laptop on macOS 10.14
This issue was present at macOS 10.13.6 as well.
There is no display recognized when I plug in the HDMI cable. It works on windows and ubuntu perfectly fine. I also watched IORegistry explorer while pluggin in the cable. There is nothing happening.
I already played around with the framebuffer settings. The current config.plist is attached. That should show the framebuffer parameters.
For graphic support I use Whatevergreen.kext
The following kexts are present in clover:
ACPIBatteryManager.kext
AppleALC.kext
AppleBacklightInjector.kext
BrcmFirmwareData.kext
BrcmPatchRAM2.kext
FakePCIID.kext
FakePCIID_Broadcom_WiFi.kext
FakeSMC.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_SMMSensors.kext
Lilu.kext
RealtekRTL8111.kext
SATA-100-series-unsupported.kext
Sinetek-rtsx.kext
USBInjectAll.kext
WhateverGreen.kext
to cut a long story short: HDMI isn't working with my laptop on macOS 10.14
This issue was present at macOS 10.13.6 as well.
There is no display recognized when I plug in the HDMI cable. It works on windows and ubuntu perfectly fine. I also watched IORegistry explorer while pluggin in the cable. There is nothing happening.
I already played around with the framebuffer settings. The current config.plist is attached. That should show the framebuffer parameters.
For graphic support I use Whatevergreen.kext
The following kexts are present in clover:
ACPIBatteryManager.kext
AppleALC.kext
AppleBacklightInjector.kext
BrcmFirmwareData.kext
BrcmPatchRAM2.kext
FakePCIID.kext
FakePCIID_Broadcom_WiFi.kext
FakeSMC.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_SMMSensors.kext
Lilu.kext
RealtekRTL8111.kext
SATA-100-series-unsupported.kext
Sinetek-rtsx.kext
USBInjectAll.kext
WhateverGreen.kext