- Joined
- Oct 7, 2011
- Messages
- 197
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i7 8700
- Graphics
- RX580 Nitro+
- Mac
- Mobile Phone
Thanks for your feedback. Another item to check is whether your USB devices require more current than a port can actually supply. Normally that cannot happen but sometime ago I used a USB 2 hub and plugged in devices with a combined current requirement in access of what the port could provide. One was a Logitech camera and the other a Wacom Intuos 5 tablet. That combination did not "play" well.
I just moved the two items so that each one was plugged into its own dedicated port with the current drawn by each device, on it's own port, being well within the current
rating available on each port.
Wish you luck again let me know when your problem is solved and what it actually turned out to be. I once used a Corsair 850i but that I returned after I unpacked it and saw what I was getting. Ribbon cables on a PSU is not for me
Greets
I did notice that it has a coil whine when the processor is in full load. It's definitely not the graphics card, it's the PSU. Not sure if it's a reason for RMA.
I'm usually just using USB3 hard drives which are mostly powered separately.