Contribute
Register

[Guide] Lenovo IdeaPad U330/U430/U530 using Clover UEFI

Status
Not open for further replies.
In general no problems with colors on monitor. But in Sierra it was 32 bit after became 24 bit, strange )

If there is no observable effect, why do you care?
And until you analyze your EDID, you don't really know which one is correct.
Maybe 10.13 is actually showing the correct value...
 
If there is no observable effect, why do you care?
And until you analyze your EDID, you don't really know which one is correct.
Maybe 10.13 is actually showing the correct value...
Maybe you are right cause we now update from 10.12.6 to 10.13.2 on MacBook Air 11 2011 on intel hd graphics 5000 and it shows 24 bit too))
 
Thanks RehabMan for your work and these great guides ! got it installed on my u430 pretty straight forward.
only thing not working is the nvidia gpu. not quite sure how to understand your guide ( https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/ ).
but if I'm not mistaken, it's just to not use the 2. gpu . right ?
is it possible to get it to work ?
cheeers,
ipp

EDIT: OK, never mind. found it in the Laptop-FAQs.
 
Last edited:
Thanks RehabMan for your work and these great guides ! got it installed on my u430 pretty straight forward.
only thing not working is the nvidia gpu. not quite sure how to understand your guide ( https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/ ).
but if I'm not mistaken, it's just to not use the 2. gpu . right ?
is it possible to get it to work ?
cheeers,
ipp

EDIT: OK, never mind. found it in the Laptop-FAQs.

Nothing to do to disable the Nvidia.
It is already done if you follow post #1.
 
Hi.
Can we enable card reader for this beautiful laptop?
I read faq and see that card reader isn't working now but how many time or resources needed for enable it?
Thanks for your time.
 
Hi.
Can we enable card reader for this beautiful laptop?
I read faq and see that card reader isn't working now but how many time or resources needed for enable it?
Thanks for your time.

It might work with the kext linked by the FAQ.
But you will probably need to plug in a card prior to booting.
I haven't looked into it as I have no need for the card reader.
 
I installed high sierra 10.13.2 I followed your guide

but I have a problem with the trackpad, it does not work, my trackpad is an elan
problem with battery status locked

I am attaching the required files

thank you
 

Attachments

  • CLOVER.zip
    1.6 MB · Views: 72
  • ioreg.ioreg
    3.4 MB · Views: 82
  • Schermata 2017-12-23 alle 02.13.08.png
    Schermata 2017-12-23 alle 02.13.08.png
    303.7 KB · Views: 65
  • RehabMan.zip
    41.7 KB · Views: 73
I installed high sierra 10.13.2 I followed your guide

but I have a problem with the trackpad, it does not work, my trackpad is an elan
problem with battery status locked

I am attaching the required files

thank you

Your ACPI configuration is wrong.
Run 'make install' as per post #1.

You can use google to find the ELAN kext. It is not supported here, though, as it is closed-source, and in violation of the APSL.
 
Your ACPI configuration is wrong.
Run 'make install' as per post #1.

You can use google to find the ELAN kext. It is not supported here, though, as it is closed-source, and in violation of the APSL.
I Rehabman i have launch make install but battery icon show percentage locked
thanks Rehabman
 
It might work with the kext linked by the FAQ.
But you will probably need to plug in a card prior to booting.
I haven't looked into it as I have no need for the card reader.
Sorry for question, but I can't see this card reader kext linked by the FAQ. Do you have link for this kext or name for searching?
 
Status
Not open for further replies.
Back
Top