the DeviceProperties.. yesso is there any way to copy the settings from clover config.plist to open core.plist
Specially Graphics settings
So can only copying Device properties will work in my case?because some of the kernal patches are present in clover plist file likethe DeviceProperties.. yes
those are not required anymoreSo can only copying Device properties will work in my case?because some of the kernal patches are present in clover plist file like
1. change GFX0 to IGPU
2. change PEGP to GFX0
read the above linkIf that are not required then with clover device properties my UHD should work,i will give it a try, apart from that anyrhing need to copy for UHD acceleration?
I would like to share my dual 4K60 or only 5K60 with HD 530 and I think it worked well.DisplayPort is not working on HD 530.
HDMI works well with single monitor 1080p@60hz.
DisplayPort or HDMI+DisplayPort (Dual Monitor) works only if added property: "device-id=(tried to many Fake IDs)", but with no acceleration.
I just want to use a single 4K@60hz monitor with full acceleration.
What is the problem?
Nice to hear you got it working.And after many nights I managed to solve the problem ......to me it seems that everything works fine, the only problem to hear the audio with HDMI I have to connect and disconnect the cable, only in this way the hdmi audio of the TV detects me ... I don't know if it is possible to solve ....
Phoenix2004z has not been seen for 2 yearsNice to hear you got it working.
Still no luck here.
Could you share your config.plist ?