Contribute
Register

[Guide] Intel Framebuffer patching using WhateverGreen

whenever I switch to 19,1 display goes within 2-3 second after booting
 
Thanks for the File,but still it is not working,i have tested both the ports....so is there any way to copy the settings from clover config.plist to open core.plist

Specially Graphics settings
 
so is there any way to copy the settings from clover config.plist to open core.plist

Specially Graphics settings
the DeviceProperties.. yes
 
the DeviceProperties.. yes
So can only copying Device properties will work in my case?because some of the kernal patches are present in clover plist file like
1. change GFX0 to IGPU
2. change PEGP to GFX0
 
If that are not required then with clover device properties my UHD should work,i will give it a try, apart from that anyrhing need to copy for UHD acceleration?
 
If that are not required then with clover device properties my UHD should work,i will give it a try, apart from that anyrhing need to copy for UHD acceleration?
read the above link
 
DisplayPort is not working on HD 530.

HDMI works well with single monitor 1080p@60hz.

DisplayPort or HDMI+DisplayPort (Dual Monitor) works only if added property: "device-id=(tried to many Fake IDs)", but with no acceleration.

I just want to use a single 4K@60hz monitor with full acceleration.

What is the problem?
I would like to share my dual 4K60 or only 5K60 with HD 530 and I think it worked well.
EFI as attachment.

230594903-30208f7e-b6aa-41de-8c48-ebdc91990a47.png
截圖 2023-04-10 下午7.10.02.png
 

Attachments

  • EFI.112-0407.OC091.Skylake.zip
    14.9 MB · Views: 92
And after many nights I managed to solve the problem :Do_O:geek::rolleyes:......to me it seems that everything works fine, the only problem to hear the audio with HDMI I have to connect and disconnect the cable, only in this way the hdmi audio of the TV detects me ... I don't know if it is possible to solve ....
Nice to hear you got it working.
Still no luck here.
Could you share your config.plist ?
 
Nice to hear you got it working.
Still no luck here.
Could you share your config.plist ?
Phoenix2004z has not been seen for 2 years
 
Back
Top