RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,015
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Here is the audio dump
Wrong audio device. That is for Intel HDMI, not your onboard HD audio.
Here is the audio dump
Wrong audio device. That is for Intel HDMI, not your onboard HD audio.
Do you know how I can get the correct dump?
here is what I found on google and used for the included dump
cat /proc/asound/card0/codec#0 > ~/Desktop/codec_dump.txt
thx
Try at /proc/asound/card1/codec#0
Explanation:
Unlike Sandy/Ivy(and it appears Skylake) which have two codecs (on-board/HDMI) on one audio device (HDEF), Haswell/Broadwell has each codec on its own audio device (HDEF/B0D3).
That worked, thx.
Here is the dump
It is Realtek ALC280. Note: "Vendor Id: 0x10ec0280"
You can use AppleHDA_ProBook.kext with layout-id 4.
See here: https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch
The AppleHDA patches required are in the appropriate plist for your model.
In fact, the ACPI setup there is a complete Clover hotpatch for this model... (no static patching, all dynamic).
Ok so we determined its a ALC280. I downloaded the zip file from github and extracted it.
I am guessing that I have to load AppleHDA Probook.kext into S/L/E with Kext wizzard.
If you could break down the required steps to follow as I'm not sure what you mean. Even though this is my 4th Hackintosh, I am no way an expert at this.
Thanks for all the help. I would be completely lost with out your help.
Are you familiar with the ACPI patches required for AppleHDA?
T
Then you need the AppleHDA patches in your config.plist. They are in config_ALC280.plist as well as in config_8x0s_G2_Haswell.plist. Y
Should I use the Broadwell version instead as the 820 g2 has a Broadwell chip set? i5-5300