- Joined
- Jan 21, 2012
- Messages
- 4
- Motherboard
- GA-Z68MA D2H (UEFI)
- CPU
- i5-3475s
- Graphics
- Intel HD4000
- Mac
- Classic Mac
- Mobile Phone
neilhart, thanks a lot for very useful guide!
My way:
1. install clean 10.8.3 to old disk
2. setup kexts/dsdt/settings until stable boot with UseKernelCache (this is very important!)
3. create time machine for this well configured installation on another drive and copy to this "another drive" folder i386 (from chimera 2) and /Extra
4. boot up from install flash drive
5. create fusion-drive (using terminal.app from installation flash-drive)
6. restore time machine to fusion-drive
7. just after restoring you can open terminal.app (on installation flash-drive) and make this fusion bootable
…..
I hope this will be useful for someone.
My way:
1. install clean 10.8.3 to old disk
2. setup kexts/dsdt/settings until stable boot with UseKernelCache (this is very important!)
3. create time machine for this well configured installation on another drive and copy to this "another drive" folder i386 (from chimera 2) and /Extra
4. boot up from install flash drive
5. create fusion-drive (using terminal.app from installation flash-drive)
6. restore time machine to fusion-drive
7. just after restoring you can open terminal.app (on installation flash-drive) and make this fusion bootable
…..
I hope this will be useful for someone.