[Guide] Acer S3-391 Ivy Bridge

[Mrreese]

It is compatible with Mavericks.

As for your question...

Please read the rules: http://www.tonymacx86.com/faq.php

"Prerelease Software or Developer Builds are covered by NDA and therefore there cannot be any discussion of features included or removed within said software. The NDA also prohibits the distribution of any component contained within these releases. There will be no discussion of installing, help with installing or documenting the use of this type of software. Repeated violations of this rule will result in a permanent ban."

I'm sorry, so this card is used in each of the acer aspire 391?

 

[RehabMan]

I'm sorry, so this card is used in each of the acer aspire 391?

No idea. I don't have any Acer computers.

 

[sotongster]

hi there question!

would following the guide on page one work if installing mavericks?

in additon, can i just get a wifi dongle so as to get wifi to work or do i have to swap the cards out inorder for me to get wifi to work?

 

[RehabMan]

hi there question!

would following the guide on page one work if installing mavericks?

Read post #1.

in additon, can i just get a wifi dongle so as to get wifi to work or do i have to swap the cards out inorder for me to get wifi to work?

Better results with a supported half-mini PCIe wifi card.

 

[robroy]

Could you or anybody else describe the part with Multibeast, SSDT, DSDT and boot.plist, smbois.plist?
I've got the same Ultrabook as crunchie, so I can use his SSDT, is this correct? And what about the DSDT, my BIOS is Version 2.X with UEFI. BTW I'm very unexperienced with Hackintoshes, I just read about it und watched some videos.

Thanks
Rob

Edit: I want to install Yosemite, because I didn't find out how to download Mavericks
Edit 2: So my current problem is that I'm stuck here: http://i1377.photobucket.com/albums...4-819D-417D-8D49-6C1AED3D285B_zpsx9uup5ts.jpg

 

[Mrreese]

Is that installs seamlessly in Yosemite?

 

[cpt.fly]

Hallo Everybody,

first off all, sorry for my english.
iam new to hackintosh and iam trying to get yosemite running on my s3-391.
i followed the guide an have some problems with:

- No SSDT, simbios
- No Sound
- No Touchpad, only Keyboard works until sleep/wake
- No Network (USB-Stick Ralink RT3072)
- CPU Fan are loud

Please, can someone help me?

thanks, cpt.fly

 

[RehabMan]

Hallo Everybody,

first off all, sorry for my english.
iam new to hackintosh and iam trying to get yosemite running on my s3-391.
i followed the guide an have some problems with:

- No SSDT, simbios
- No Sound
- No Touchpad, only Keyboard works until sleep/wake
- No Network (USB-Stick Ralink RT3072)
- CPU Fan are loud

Please, can someone help me?

thanks, cpt.fly

Work on power management first: http://www.tonymacx86.com/mavericks...-bridge-ivy-bridge-haswell-other-laptops.html

Your trackpad is ELAN. You should search for PS2 drivers for ELAN...

You would need to install drivers for your Ralink USB WiFi, assuming they are available. It is better to use a supported half-mini PCIe wifi card though.

Audio: Best result with patched AppleHDA. Google 'patch AppleHDA guide'. Search for suitable AppleHDA or patch it yourself. Apply appropriate DSDT patches.

DSDT patches you need for AppleHDA: https://github.com/RehabMan/Laptop-DSDT-Patch
Apply: "Audio Layout 12" (change layout-id from 12 to the layout-id used by the patched AppleHDA)
Apply: "IRQ Fix"

Determine layout-id from patched AppleHDA.kext:

First you need to know your codec id in decimal. Then look in the Info.plist for AppleHDAHardwareConfigDriver.kext (in PlugIns), find your codec id under HDAConfigDefault (there may be many entries in a sloppy patched AppleHDA or only one). The LayoutID that matches your codec id is the layout id you need.

 

[cpt.fly]

Hy, Thanks for your help.

i´ve done a fresh instal from unibeast and then:

- Multibeast (Chimera, FakeSMC, GenericUSB3, Patched AppleCPUPowerManagement)
- Reboot
- Chameleon Wizzard SMBios MacBookAir5,2
- Reboot
- HP ProBook Installer Generate SSDT
- Reboot
- Generate IORegExp.-File attached

Is so far everting right?
When i use P States in DPCIManager it ask me for the password and nothing happens..?

Thanks, Cpt.Fly

 

[RehabMan]

Hy, Thanks for your help.

i´ve done a fresh instal from unibeast and then:

- Multibeast (Chimera, FakeSMC, GenericUSB3, Patched AppleCPUPowerManagement)
- Reboot
- Chameleon Wizzard SMBios MacBookAir5,2
- Reboot
- HP ProBook Installer Generate SSDT
- Reboot
- Generate IORegExp.-File attached

Is so far everting right?
When i use P States in DPCIManager it ask me for the password and nothing happens..?

Thanks, Cpt.Fly

What version of Mavericks?

Download patchmatic: https://github.com/RehabMan/OS-X-MaciASL-patchmatic.
Extract the 'patchmatic' binary from the ZIP. Copy it to /usr/bin, such that you have the binary at /usr/bin/patchmatic.

In terminal,

rm -Rf ~/Downloads/RehabMan
mkdir ~/Downloads/RehabMan
cd ~/Downloads/RehabMan
patchmatic -extract

Post contents of Downloads/RehabMan directory (as ZIP).

Also, post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

And output from:

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu