Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[CaseySJ]

The link leads to another kind of product. Can you check it again?

The link is correct, but it's for the Amazon USA site. You can also search Amazon or Google using the product name in the screenshot.

 

[sckn]

The link is correct, but it's for the Amazon USA site. You can also search Amazon or Google using the product name in the screenshot.

I just want to be clarified, I found the product, searched it with the code on the ScreenShot. And found it. But one of the product properties says "Support System: for WINXP, for WIN7, for WIN8, for WIN10, for LINUX.". Should I worry or it's okay?

 

[sckn]

Or can I go with that too?

 

[CaseySJ]

I just want to be clarified, I found the product, searched it with the code on the ScreenShot. And found it. But one of the product properties says "Support System: for WINXP, for WIN7, for WIN8, for WIN10, for LINUX.". Should I worry or it's okay?

It is okay because the BCM94360NG is natively supported in macOS. So no worries. However, I have not tried this product myself, so buyer beware!

Or can I go with that too?

View attachment 533187

That will convert the BCM94360NG into mini-PCIe. Then another adapter will be needed to go from mini-PCIe to PCIe x1. So it's better to avoid that one.

 

[haurb900]

Happily running my new hack thanks to ya'll!

z490 vision g, i9-10850 OC'd 5.0 GHz
My Radeon FE has a nice bump in performance in geekbench from my z390 board. It was around 5900 OpenCL and 6300 metal on the z390. Scores are now 67189 OpenCL and 67155 Metal on the z490. Single core cpu is 1313, and multi-core 11355. I have a 6600 XT on the way. I'll install once I upgrade to Monterey.

Only thing not working is Wifi/bluetooth with my old Fenvi-T919. Bluetooth USB Host Controller shows up in IOReg where I have it plugged into the USB Header, that's about it... I ordered the YOUBO and will install tomorrow. if that doesn't work I'll go the Bcm94360cs2 route.

Running Big Sur 11.6, oc 0.7.5, imacpro1,1. Thanks for all the hard work!!

*edit

Installed the YOUBO this morning, and it works OOB. Seems that my z490 Vision G doesn't like the Fenvi-T919. Just a heads up for anyone looking to build with this board.

 

[joe6187]

@CaseySJ Have a test for i225v and BT both working at OC74, OC75
Also tested OC75 ResizeBar setting, Attach Both EFI, please let me know if I got any wrong setting.
Hope can help the investigation on z490 broad 2.5g lan issue
Hardware :
CPU: Intel i9 10900K 3.8GHz OC to 5.1GHz
GPU: Gigabyte RX6900XT 16G
RAM: Kingston HYPERX ARGB DDR4 3600 64GB
Motherboard : Gigabyte Z490 VISION D
Audio Codec: ALC1220VB
LAN : On Borad Intel® 2.5GbE, 1GbE
BIOS Version : F20a
SSD : WD SN750 M.2 2T (MacOS), WD SN750 M.2 1T (Windows10)
HP EX950 M.2 2T (Mac Storage)
Wifi/BT Card: Apple BCM94360CDP
PSU : Seasonic GN1000W

 

[CaseySJ]

@CaseySJ Have a test for i225v and BT both working at OC74, OC75
Also tested OC75 ResizeBar setting, Attach Both EFI, please let me know if I got any wrong setting.
Hope can help the investigation on z490 broad 2.5g lan issue
Hardware :
CPU: Intel i9 10900K 3.8GHz OC to 5.1GHz
GPU: Gigabyte RX6900XT 16G
RAM: Kingston HYPERX ARGB DDR4 3600 64GB
Motherboard : Gigabyte Z490 VISION D
Audio Codec: ALC1220VB
LAN : On Borad Intel® 2.5GbE, 1GbE
BIOS Version : F20a
SSD : WD SN750 M.2 2T (MacOS), WD SN750 M.2 1T (Windows10)
HP EX950 M.2 2T (Mac Storage)
Wifi/BT Card: Apple BCM94360CDP
PSU : Seasonic GN1000W
View attachment 533248View attachment 533249

If you connect an Ethernet cable to the red i-225V port, does it connect and get an IP address in “System Information —> Network”?

 

[joe6187]

If you connect an Ethernet cable to the red i-225V port, does it connect and get an IP address in “System Information —> Network”?

I only connect with 2.5G, and off wifi, still can on net

 

[f1zzas]

Does anyone tried Windows 11 on this build? When I scanning for Windows 11 upgrade in Win 10 it says compatible but no upgrade found, thinking about to reinstall Windows completely and go for Win11 this time.

Also, any tips for installing windows on separate drive? I currently have ugly structure, my macOS disk has EFI for windows and macos, but OS are on different SSD's. After latest OC upgrade I can't boot to Windows anymore, so I was thinking just to erase DISK2 and install windows there from win11 bootable usb. Then should be 2 EFI partitions for DISK1 and DISK2 right?

 

[MacArthur]

I did. Working like a charm.
Don't forget to disconnect all hard disks where macOS is installed. Windows does like to share and may put a mess.
Install windows and then reconnect.
Il on SSD nvme it mus be on the one closet to CPU.