Contribute
Register

[Solved] GA-Z87M-D3H - Won’t Start: Progress Bar is Stuck [Sierra 12.5]

Status
Not open for further replies.
ratchet

ratchet

Joined
Mar 17, 2013
Messages
20
Motherboard
Gigabyte Z77-DS3H
CPU
Intel i7-3770K
Graphics
GTX 660
Mac
  1. Mac mini
Mobile Phone
  1. Android
Hi,

Please help me!
I would like a suprise for my girlfriend.
I want to install a Sierra 12.5
But Post Installation with MultiBeast, the progress bar is stuck. :(

1) I created a bootable USB Drive with UniBeast (Sierra 12.5)
2) Boot from pendrive USB EFI and install macOS Sierra
3) Reboot and finish the Sierra Installation.
4) Post Installation with MultiBeast - I think I can make a mistake here.
5) Reboot and the macOS won't start, the progress bar is stuck.

I try more than 20 times.
Anyone could help me, what is the proper settings in post installation with MultiBeast?

The configuration:
Motherboard: Gigabyte GA-Z87M-D3H [rev. 1.1] (Intel Z87 Express Chipset, Realtek ALC892 audio, Realtek GbE LAN)
Processor: Intel Core i5-4690
Graphic: Intel HD Graphics 4600 - The configuration doesn't have graphic card.
Memory: 16 GB RAM
Storage: Samsung EVO 840 SSD

I'm using the latest MultiBeast 9.1.0. My settings:

Quick start:
UEFI Boot Mode

Drivers:
Audio: Realtek ALC892
Disk: ??? (I tried the all combination)
Misc: FakeSMC v6.25-332-gf3a8525c.1758
Network: RealtekRTL8111 v2.2.1
USB: ??? (I tried the all combination)

Bootloader:
Clover v.2.4k r4063 UEFI Boot Mode

Customize:
Graphics configuration: I left it empty, because I can't find Iris 4600. (This computer doesn't have graphic card.)
SSDT: I left it empty.
System definitions: iMac 14,2

Please help me!
Thanks in advance.
 
ratchet said:
But Post Installation with MultiBeast, the progress bar is stuck.
Click to expand...
Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.
At Clover Boot Screen press space bar and select Verbose (-v)
 
Hi BreBo,

Here is the picture. TIA.

frozen.jpg
 
Your screenshot shows an active Serial port which should be disabled in your BIOS settings.
Although it probably will not have an impact on your problem.
 
P1LGRIM said:
Your screenshot shows an active Serial port which should be disabled in your BIOS settings.
Although it probably will not have an impact on your problem.
Click to expand...

Thank you. I don't know what is the problem. On this computer the 10.9.5 running without problems.
But the 10.9.5 using Chimera.

Any idea?
TIA
 
I can't figure out what is the problem. Please help me. Thanks.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top