Contribute
Register

[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

RehabMan said:
See guide for correct Clover setup: http://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Your kextcache output shows a lot of mistakes. So probably best to start with a fresh install.
Click to expand...


is that meant to be fixed with following output:

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext realtekALC.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext NullCPUPowerManagement.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext GenericUSBXHCI.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_LPCSensors.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_GPUSensors.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_CPUSensors.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_ACPISensors.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AHCI_Intel_Generic_SATA.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext

kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
 
Hi RehabMan, its been a while since I stopped using my Yosemite (which was working flawlessly) and I wanted to install OS X again, but this time there are a lot of video glitches bothering me, and I can't seem tone able to fix it. Here are the attachments:
 

Attachments

  • Marcus’s MacBook Pro.ioreg
    2.1 MB · Views: 109
  • Screen Shot 2016-09-12 at 7.44.46 PM.png
    Screen Shot 2016-09-12 at 7.44.46 PM.png
    482.7 KB · Views: 176
  • CLOVER.zip
    3 MB · Views: 129
MarcusDM said:
Hi RehabMan, its been a while since I stopped using my Yosemite (which was working flawlessly) and I wanted to install OS X again, but this time there are a lot of video glitches bothering me, and I can't seem tone able to fix it. Here are the attachments:
Click to expand...

FakeID/IntelGFX=0x04129086 is wrong.
Should be 0x04128086.
 
Hello, RehabMan.

My laptop config is Core i5-4210U with Intel HD 4400 Graphics, OS X El Capitan 10.11.6
After installation of FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext my graphics card is glitching, so I can't see anything on the screen. The only way to see something is to unmark the Graphics inject in Clover on boot. Help me, please.

Code: 
MacBook-Pro-Vlad:~ vlad$ sudo touch /System/Library/Extensions && sudo kextcache -u /

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kex
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext file:///System/Library/Extensions/AppleHDADisabler.kext/ is in hash exception list, allowing to load
 

Attachments

  • macbookpro.ioreg.zip
    340.8 KB · Views: 87
  • CLOVER.zip
    2.2 MB · Views: 98
VladStarr said:
Hello, RehabMan.

My laptop config is Core i5-4210U with Intel HD 4400 Graphics, OS X El Capitan 10.11.6
After installation of FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext my graphics card is glitching, so I can't see anything on the screen. The only way to see something is to unmark the Graphics inject in Clover on boot. Help me, please.

Code: 
MacBook-Pro-Vlad:~ vlad$ sudo touch /System/Library/Extensions && sudo kextcache -u /

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kex
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext file:///System/Library/Extensions/AppleHDADisabler.kext/ is in hash exception list, allowing to load
Click to expand...

This ioreg does not correspond to the config.plist you provide. It is as if you're turning off graphics injection before you're booting.

If you can't boot with injection, you will need to provide a photo. From your description, seems like you need to enable legacy boot/CSM in BIOS.
 
RehabMan said:
This ioreg does not correspond to the config.plist you provide. It is as if you're turning off graphics injection before you're booting.

If you can't boot with injection, you will need to provide a photo. From your description, seems like you need to enable legacy boot/CSM in BIOS.
Click to expand...
I have already fixed the problem. The problem was the editing .plist by Clover Configurator. I replaced my plist with yours for HD4400 and seems to work fine. Now I'm using only PlistEdit Pro.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top