FIX for boot hangs after BIOS update (ACPI PATCH)

[mattystonnie]

good but now i only have monitor with hdmi prot
so i will need to buy a monitor with dvi port or rx580 video card to get another port of hdmi

No. You can try an adapter Display Port to HDMI and use it into the Display Port of your motherboard, look at the picture.

Ok, let try another EFI folder. Enable USB Legacy in Bios.

 

[mattystonnie]

good but now i only have monitor with hdmi prot
so i will need to buy a monitor with dvi port or rx580 video card to get another port of hdmi

I think I figured out your video ports output, I'll work for a patch.

 

[Stargovic]

thank you
i tried the last EFI folder with legacy ON and Also Off it give the same result
now i will go to buy Adapter will check Again
Thank you

 

[mattystonnie]

thank you
i tried the last EFI folder with legacy ON and Also Off it give the same result
now i will go to buy Adapter will check Again
Thank you

I made a patch for you video ports : HDMI,DP, etc. This should give you video output.

Replace EFI folder and remember bios settings : Secure Boot Disabled, CFG lock Disabled, XHCI handoff Enabled, Legacy USB enabled, Graphics IGPU primary DVMT 128 MB or 64 MB, UEFI boot, CSM disabled.

 

[xenear]

Can anyone help me?
I'm using USB 2.0, 3.0, 3.1 ports and USB 2/3 flash drive. Also I roll back my bios. This stuck

 

[mattystonnie]

Can anyone help me?
I'm using USB 2.0, 3.0, 3.1 ports and USB 2/3 flash drive. Also I roll back my bios. This stuck

Apply the patch.

 

[xenear]

Apply the patch.

It's work, but now I have this

 

[mattystonnie]

It's work, but now I have this

What do you have? Add you EFI folder here.

 

[xenear]

What do you have? Add you EFI folder here.

 

[mattystonnie]

Clear CMOS (reset Bios) and Redo the Bios settings again.