Contribute
Register

Fan and restart problem

Status
Not open for further replies.
FYI: The DSDTs from nguyenmac post #30 set other values.



I assume by 'no audio' you mean 'no HDMI-audio'...

HDMI-audio requires patches to the kext (usually done via config.plist). Since the framebuffer changes between versions, it could be the patches you have are not correct for 10.9.1.

He is using patched DSDT.aml by PBI, with correct ig-platform-id.

The config.plist he is using has patch for 10.9.1 too. I'm not sure if Clover patch is working though.
 
Hm, i can't compile my DSDT.asl from clover patched folder after i opened in. No changes done. Is it normal? Снимок экрана 2014-09-11.png
 
He is using patched DSDT.aml by PBI, with correct ig-platform-id.

The config.plist he is using has patch for 10.9.1 too. I'm not sure if Clover patch is working though.

The framebuffer patches tend to change version to version. I've never looked at HDMI-audio in 10.9.1. Only 10.9.2, 10.9.3, and 10.9.4 (10.9.3 and 10.9.4 did not change as far as framebuffer data associated with 0a260006).

Note: Nothing regarding HDMI-audio would be expected until an HDMI-audio capable device is plugged in. And even then you must manually switch to it.
 
Can somebody please help me?
I recently bought 430 g1 mode; with i3.
I added 4gb more ram and replaced hdd with ssd. Then, successfully installed osx on it using this instructions http://www.tonymacx86.com/hp-probook-mavericks/112383-guide-install-mavericks-clover-bootloader.html
The problems are:
1. Fan is always on around 3700 rpm
2. Restart doesn't work
3. Then i close laptop it doesn't sleep.
Thank you.

Hello there!
I also have a 430 g1 laptop.
Shutdown and sleep is normal;
Apple-> Restart? It will close the screen and restart, the screen does not display, do not press the boot button to start the same screen, it has been black, but the actual start working properly, enter the desktop when the screen lights up.
I ask you if there is such a problem.
is it solved?
How to solve?
 
Hello there!
I also have a 430 g1 laptop.
Shutdown and sleep is normal;
Apple-> Restart? It will close the screen and restart, the screen does not display, do not press the boot button to start the same screen, it has been black, but the actual start working properly, enter the desktop when the screen lights up.
I ask you if there is such a problem.
is it solved?
How to solve?

Enable CSM/legacy boot in BIOS.

Make sure you followed the guide: https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/
 
I installed it in full compliance with the guidelines;
It seems to have been very complete;
But click Apple -> Restart - the screen does not display, there is no boot interface, the actual work;
The screen lights up when entering the MAC.

Code:
LiudeMacBook-Pro:RehabMan liu$ kextstat|grep -y acpiplat
   13    2 0xffffff7f82e3a000 0x66000    0x66000    com.apple.driver.AppleACPIPlatform (4.0) A29C7512-D3A8-3AED-9721-3A5FF1A32EB2 <12 11 7 6 5 4 3 1>
LiudeMacBook-Pro:RehabMan liu$ kextstat|grep -y appleintelcpu
LiudeMacBook-Pro:RehabMan liu$ kextstat|grep -y applelpc
  109    0 0xffffff7f8280f000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) 32BDCF9F-0473-32D4-9DAE-F523EFB2D244 <82 12 5 4 3>
LiudeMacBook-Pro:RehabMan liu$ kextstat|grep -y applehda
   94    1 0xffffff7f82b17000 0x1e000    0x1e000    com.apple.driver.AppleHDAController (274.12) 5F94D8E3-B1E5-35D7-AB7A-6419C3AAC3B5 <93 92 74 12 7 6 5 4 3 1>
  119    0 0xffffff7f82c83000 0xb3000    0xb3000    com.apple.driver.AppleHDA (274.12) 436B78B7-FA08-3C53-B97D-5C617CB7EB28 <118 101 94 93 92 74 12 11 6 5 4 3 1>
LiudeMacBook-Pro:RehabMan liu$ ls -l /System/Library/Extensions/AppleHDA.kext/Contents/Resources/*.zml*
-rw-r--r--  1 root  wheel  5330 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/Platforms.zml.zlib
-rw-r--r--  1 root  wheel   880 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout12.zml.zlib
-rw-r--r--  1 root  wheel   880 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout13.zml.zlib
-rw-r--r--  1 root  wheel   350 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout17.zml.zlib
-rw-r--r--  1 root  wheel   884 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout18.zml.zlib
-rw-r--r--  1 root  wheel   880 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout19.zml.zlib
-rw-r--r--  1 root  wheel  1815 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout3.zml.zlib
-rw-r--r--  1 root  wheel  1830 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout4.zml.zlib
-rw-r--r--  1 root  wheel  1102 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout5.zml.zlib
-rw-r--r--  1 root  wheel  1839 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout6.zml.zlib
-rw-r--r--  1 root  wheel  1079 11 15 09:36 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout7.zml.zlib
LiudeMacBook-Pro:RehabMan liu$ sudo touch /System/Library/Extensions && sudo kextcache -u /
Password:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext
kext file:///Library/Extensions/JMicronATA.kext/ is in hash exception list, allowing to load
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext JMB38X.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IOath3kfrmwr.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext file:///Library/Extensions/HSSDBlockStorage.kext/ is in hash exception list, allowing to load
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_XHCIMux.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HDMI_Audio.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIPoller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
 

Attachments

  • EFI.zip
    1.6 MB · Views: 142
  • RehabMan.zip
    64.4 KB · Views: 147
  • LiudeMacBook Pro.ioreg.zip
    504 KB · Views: 140
  • BIOS1.jpg
    BIOS1.jpg
    6.1 MB · Views: 164
  • BIOS2.jpg
    BIOS2.jpg
    4.1 MB · Views: 153
I installed it in full compliance with the guidelines;
It seems to have been very complete;
But click Apple -> Restart - the screen does not display, there is no boot interface, the actual work;
The screen lights up when entering the MAC.

Is "fast boot" disabled?
 
"Fast boot" is disabled.
 

Attachments

  • IMG_20161119_081352.jpg
    IMG_20161119_081352.jpg
    54 KB · Views: 130
Status
Not open for further replies.
Back
Top