Fan and restart problem

[andemort]

How are your CPU temperatures?

You could try the various fan patches.

around 40 degrees (celsius) Will fan patches work on 430 g1? As i understood thear are for 4x30s

No idea on the restart problem. Do you have Radeon?

Please update your profile...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Thank you, done.

 

[andemort]

i had restart problem on 440 g1 (black screen no hp logo)
now problem solved
update your HP ProBook Installer Clover Edition to 6.2.7.1
use UEFI native without CSM

Thank you for anwer, i did install with these options. Still same problem.
And btw, does your fan work at 40 degrees?
did you do anything else? my problem seems to be exactly like yours

 

[azlvda]

Thank you for anwer, i did install with these options. Still same problem.
And btw, does your fan work at 40 degrees?
did you do anything else? my problem seems to be exactly like yours

fan 2997-3034 at 40 degrees
btw i just updated bios ..maybe it fixes restart problem

 

[andemort]

I updated too) still no result. My fan goes 4600 rpm at the same tempereture, but i would prefer it starts to work at 50 degrees

 

[nguyenmac]

This may be not related to your Restart problem, but can you (and any other with 4x0 G1) can upload CLOVER folder for me? The ioreg shows that a dsdt patch is not working properly, thanks.

 

[andemort]

This may be not related to your Restart problem, but can you (and any other with 4x0 G1) can upload CLOVER folder for me? The ioreg shows that a dsdt patch is not working properly, thanks.

Thank you for answer. Do you mean the one that is on efi partion?
If so i will uploaud this in the evening (4 hours later) using this instruction in terminal

mkdir /Volumes/EFI
sudo mount -t msdos /dev/disk0s1 /Volumes/EFI

 

[nguyenmac]

Thank you for answer. Do you mean the one that is on efi partion?
If so i will uploaud this in the evening (4 hours later) using this instruction in terminal

Right, thank you.

 

[azlvda]

hi nguyenmac,

can you check for me? thanks
hp probook 440 g1 i5 4200M

 

[nguyenmac]

hi nguyenmac,

can you check for me? thanks
hp probook 440 g1 i5 4200M

Replace your config.plist with this file, restart and post ioreg

 

[azlvda]

here's the ioreg thx