Fan and restart problem

[RehabMan]

here the result
70 0 0xffffff7f81e3e000 0x68000 0x68000 com.apple.driver.AppleIntelFramebufferAzul (8.2.8) <69 68 34 14 11 10 7 6 5 4 3 1>

That is 10.9.4 version.

 

[azlvda]

I assme you're using 10.9.4 and didn't install 10.9.1 graphics kexts right?

Then try those 2 DSDT.aml. Put them in /EFI/CLOVER/ACPI/patched, then go to Clover option menu in Clover bootscreen, rename "DSDT.aml" to the name of dsdt file you want to use, post ioreg in each time (if you can boot) and try again with HDMI.

dsdt 2
hdmi freeze and restart

dsdt 3
hdmi freeze but no restart

should i install 10.9.1 graphic kext?

That is 10.9.4 version.

sorry, never use hdmi before, i dont realize haswell hdmi just have a problem

 

[RehabMan]

...
sorry, never use hdmi before, i dont realize haswell hdmi just have a problem

There is not a general problem with Haswell HDMI. I use HDMI video/audio using stock kexts without issue on my Lenovo U430. But certain laptops (such as the G1) and desktops there is issues with hotplug.

 

[nguyenmac]

dsdt 2
hdmi freeze and restart

dsdt 3
hdmi freeze but no restart

should i install 10.9.1 graphic kext?




sorry, never use hdmi before, i dont realize haswell hdmi just have a problem

Looks like we can't get HDMI without using 10.9.1 kexts:

http://www.tonymacx86.com/hp-probook-mavericks/132884-hdmi-freeze-hp-probook-elitebook-g1.html

Install those kexts and test again (HDMI Audio test too).

 

[RehabMan]

Looks like we can't get HDMI without using 10.9.1 kexts:

http://www.tonymacx86.com/hp-probook-mavericks/132884-hdmi-freeze-hp-probook-elitebook-g1.html

Install those kexts and test again (HDMI Audio test too).

Probably a good link for post #1 of the guide, "Known Issues"...

 

[azlvda]

Looks like we can't get HDMI without using 10.9.1 kexts:

http://www.tonymacx86.com/hp-probook-mavericks/132884-hdmi-freeze-hp-probook-elitebook-g1.html

Install those kexts and test again (HDMI Audio test too).

with 10.9.1 kexts installed, i got unusable distorted screen on both dsdt

 

[RehabMan]

with 10.9.1 kexts installed, i got unusable distorted screen on both dsdt

Use a DSDT that sets ig-platform-id to 0xa260006.

 

[nguyenmac]

with 10.9.1 kexts installed, i got unusable distorted screen on both dsdt

Use DSDT.aml created by PBI CE, not the new files.

 

[azlvda]

Use a DSDT that sets ig-platform-id to 0xa260006.

yes already sets to 0xa260006

Use DSDT.aml created by PBI CE, not the new files.

here's ioreg with original dsdt..hdmi works but still no audio

 

[RehabMan]

yes already sets to 0xa260006

FYI: The DSDTs from nguyenmac post #30 set other values.

here's ioreg with original dsdt..hdmi works but still no audio

I assume by 'no audio' you mean 'no HDMI-audio'...

HDMI-audio requires patches to the kext (usually done via config.plist). Since the framebuffer changes between versions, it could be the patches you have are not correct for 10.9.1.