El Capitan 10.11.3 - Gigabyte Z170X Gaming 7 - 6700K SkyLake - Titan X - 64GB RAM - SSD

[jrii]

Can you help me fix my USB ports, so they all work and dont corrupt data files/stop copying?

Thank you

It' is impossible to help you if you do not give specs of your system!
Based on the attached picture I would quess you'll find the answer here -->

http://www.tonymacx86.com/threads/10-11-0-10-11-3-skylake-starter-guide.179221/#DetailedUSB

 

[markstone]

My Configuration
Gigabyte Z170X Gaming 7
BIOS F6
Intel Core i7 6700 SkyLake
4x 16GB - G.SKILL Ripjaws V SeriesLL Ripjaws V Series
Crucial Crucial_CT240M500SSD1 240GB SSD
Asus Titan X 16GB
2x BENQ 4K Monitors

Bios:
optimized defaults
Them Change:
SuperIO (Serial): Disabled
XHCI Handoff: Enabled
IOAPIC entries: Disabled

Installation:
1) Create an USB drive with UniBeast and El Capitan 10.11.3 from the Apple Store when is Done Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "UniBeast Clover.zip"
2) Boot from UniBeast USD drive Installation should be pretty straight forward
3) When finish Restart al boot one more time from UniBeast USB.
4) install MultiBeast - El Capitan 8.0.1 this is what my selection:
-Quick Start: UEFI Boot Mode
-Build: Install
5) them I install the NVIDIA alternate graphics drivers for OS X El Capitan 10.11.3
6)With "Easykext" install: "AppleIntelE1000e.kext" and "AppleGraphicsControl.kext" (boths inside Kexts.zip)
6)Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "Final Clover.zip"

After Reboot you should have a fully functional System.

@andycorleone
What is the maximum resolution and refresh rate on your monitor via HDMI using the internal GPU?

 

[manpower]

I'm using this board but don't know why every time when start up I lost the USB keyboard, I have to unplug and replug in into another usb on back panel to get it work again?

Another one can teach me how to fix it please?

 

[Sildereuver]

This one works very well for me! Only front USB-ports aren't working and had to install the VoodooHDA to get the audio working.
Audio was glitchy so I bought a small USB Audio card.

My Configuration
OS 10.11.6
Gigabyte Z170X Gaming 7
BIOS F8
Intel Core i7 6700K
2x 8GB - Crucial Ballistics
Samsung SSD 750 EVO 250GB
1x BENQ 2K Monitor
NVIDEA GTX 1060 6GB - Still waiting for Nvidea to update the drivers, so I can try it in OSX environment. For now using the on-board Intel card.

 

[a201326]

My Configuration
Gigabyte Z170X Gaming 7
BIOS F6
Intel Core i7 6700 SkyLake
4x 16GB - G.SKILL Ripjaws V SeriesLL Ripjaws V Series
Crucial Crucial_CT240M500SSD1 240GB SSD
Asus Titan X 16GB
2x BENQ 4K Monitors

Bios:
optimized defaults
Them Change:
SuperIO (Serial): Disabled
XHCI Handoff: Enabled
IOAPIC entries: Disabled

Installation:
1) Create an USB drive with UniBeast and El Capitan 10.11.3 from the Apple Store when is Done Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "UniBeast Clover.zip"
2) Boot from UniBeast USD drive Installation should be pretty straight forward
3) When finish Restart al boot one more time from UniBeast USB.
4) install MultiBeast - El Capitan 8.0.1 this is what my selection:
-Quick Start: UEFI Boot Mode
-Build: Install
5) them I install the NVIDIA alternate graphics drivers for OS X El Capitan 10.11.3
6)With "Easykext" install: "AppleIntelE1000e.kext" and "AppleGraphicsControl.kext" (boths inside Kexts.zip)
6)Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "Final Clover.zip"

After Reboot you should have a fully functional System.

 

[a201326]

Where can I get Kext.zip file?

 

[Sildereuver]

See first post -> Attached Files

 

[a201326]

My Configuration
Gigabyte Z170X Gaming 7
BIOS F6
Intel Core i7 6700 SkyLake
4x 16GB - G.SKILL Ripjaws V SeriesLL Ripjaws V Series
Crucial Crucial_CT240M500SSD1 240GB SSD
Asus Titan X 16GB
2x BENQ 4K Monitors

Bios:
optimized defaults
Them Change:
SuperIO (Serial): Disabled
XHCI Handoff: Enabled
IOAPIC entries: Disabled

Installation:
1) Create an USB drive with UniBeast and El Capitan 10.11.3 from the Apple Store when is Done Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "UniBeast Clover.zip"
2) Boot from UniBeast USD drive Installation should be pretty straight forward
3) When finish Restart al boot one more time from UniBeast USB.
4) install MultiBeast - El Capitan 8.0.1 this is what my selection:
-Quick Start: UEFI Boot Mode
-Build: Install
5) them I install the NVIDIA alternate graphics drivers for OS X El Capitan 10.11.3
6)With "Easykext" install: "AppleIntelE1000e.kext" and "AppleGraphicsControl.kext" (boths inside Kexts.zip)
6)Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "Final Clover.zip"

After Reboot you should have a fully functional System.

 

[a201326]

Please tell me where I can get Kext.zip file

 

[benbun]

Give me a day or so, I'll type up exactly what you need with possibly some screen shots on how to get onboard audio working as well as get rid of the multiple BIOs entries from being created.