- Joined
- Aug 24, 2011
- Messages
- 29
- Motherboard
- Gigabyte Z170X Gaming 7
- CPU
- i7 6700 SkyLake
- Graphics
- Titan X
- Mac
- Classic Mac
- Mobile Phone
My Configuration
Gigabyte Z170X Gaming 7
BIOS F6
Intel Core i7 6700 SkyLake
4x 16GB - G.SKILL Ripjaws V SeriesLL Ripjaws V Series
Crucial Crucial_CT240M500SSD1 240GB SSD
Asus Titan X 16GB
2x BENQ 4K Monitors
Bios:
optimized defaults
Them Change:
SuperIO (Serial): Disabled
XHCI Handoff: Enabled
IOAPIC entries: Disabled
Installation:
1) Create an USB drive with UniBeast and El Capitan 10.11.3 from the Apple Store when is Done Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "UniBeast Clover.zip"
2) Boot from UniBeast USD drive Installation should be pretty straight forward
3) When finish Restart al boot one more time from UniBeast USB.
4) install MultiBeast - El Capitan 8.0.1 this is what my selection:
-Quick Start: UEFI Boot Mode
-Build: Install
5) them I install the NVIDIA alternate graphics drivers for OS X El Capitan 10.11.3
6)With "Easykext" install: "AppleIntelE1000e.kext" and "AppleGraphicsControl.kext" (boths inside Kexts.zip)
6)Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "Final Clover.zip"
After Reboot you should have a fully functional System.
Gigabyte Z170X Gaming 7
BIOS F6
Intel Core i7 6700 SkyLake
4x 16GB - G.SKILL Ripjaws V SeriesLL Ripjaws V Series
Crucial Crucial_CT240M500SSD1 240GB SSD
Asus Titan X 16GB
2x BENQ 4K Monitors
Bios:
optimized defaults
Them Change:
SuperIO (Serial): Disabled
XHCI Handoff: Enabled
IOAPIC entries: Disabled
Installation:
1) Create an USB drive with UniBeast and El Capitan 10.11.3 from the Apple Store when is Done Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "UniBeast Clover.zip"
2) Boot from UniBeast USD drive Installation should be pretty straight forward
3) When finish Restart al boot one more time from UniBeast USB.
4) install MultiBeast - El Capitan 8.0.1 this is what my selection:
-Quick Start: UEFI Boot Mode
-Build: Install
5) them I install the NVIDIA alternate graphics drivers for OS X El Capitan 10.11.3
6)With "Easykext" install: "AppleIntelE1000e.kext" and "AppleGraphicsControl.kext" (boths inside Kexts.zip)
6)Mount the EFI Partition with "EFI Mounter v3" delete everything from the "CLOVER" folder replace with the files inside "Final Clover.zip"
After Reboot you should have a fully functional System.