DVD Drive's tray open automatically when boot

[nullgt]

[Fixed] DVD Drive's tray open automatically when boot

<Problems>

When I boot the OSX(when spinning circle with Apple logo), the DVD drive tray opens automatically. It happens both by booting via Unibeast USB and via Hard drive. Even if when booting in safe mode.
If a disk is already inside the drive then the tray will not open when booting. Opening tray and Closing tray correctly.And no strange dialog.

In case boot without disk inside and after logging in to the OSX, there is a pop up with the dialog "You insert a blank DVD...".(it didn't said "blank CD" "blank Blu-ray Disk". only "blank DVD")
There is a Action "Open Finder" and three button,"OK","Ignore,"Eject".

Pattern1 When I push "OK"
Finder make Untitled.fpbf and if bring this to trash, the tray open, and popup the dialog again.

Pattern2 When I push "Ignore"
Nothing happens. But I can't open tray by physical button. I can open by Disk utility's Eject button(Disk utility think that there is blank DVD). and popup again.

Pattern3 When I push "Eject"
The tray open, pop up the dialog again.

I search on Google and some people said its because of USB accessory. but i cant fix by remove all USB devices.

I don't know how to boot without disk inside. Any help would be appreciated.

<Construction>

Optical Drive : Pioneer BD-RW BDR-208M (Works perfectly on Windows 8)

System profiler's information : ASMedia ASM1061 AHCI's tree
Disk Utility's informacion : IODeviceTree:/PCI0@0/RP05@1C,4/pci1b21,612@0/PRT1@1/PMP@0

10.8.4(Mountain Lion)
CPU : Corei7 3770K IvyBridge
GPU : Geforce GTX 680
RAM: 8GB x 2
Motherboard : Asrock Z77 extreme 6
BIOS : Patched 2.40
SSD : (for Windows 8)
HDD : ( for Mac OSX and Sub Storage of Windows )

<Multibeast 5.3.1 Settings>

No UserDSDT
Realtek Without DSDT ALC898
3rd Party SATA
FakeSMC
USB 3.0
System Definitions Mac Pro 3.1
SSDT Options Sandy Bridge Corei7

<Chameleon 2.1-r2069 org.chameleon.Boot.plist>
Kernel=mach_kernel
Kernel Flags="darkwake=0"
UseKernelCache=Yes
GenerateCStates=Yes
GeneratePStates=Yes
EthernetBuiltIn=Yes
GraphicEnabler=No
LegacyLogo=Yes
Graphics Mode=1920x1080x32

Thanks

 

[shafty]

i am having the same problem have you been able to correct the problem

 

[Movilegodson]

Just dont use 0 or 1 sata connection and you be ok.

 

[shafty]

mine is on my 3rd party sataIII controller and the other hdd i have hooked up to it works fine. I installed the patch in multibeast to use those 2 sata connectors

 

[nullgt]

I tried SATA3 connector to SATA2 then fixed!

Thank you so much!

 

[star-affinity]

I can't remember that I had this problem pre Mavericks, but now it started to do this ejecting every time when booting. Guess I have to open the computer and see where the optical drive is connected.

 

[grugattony]

Hi have the same problem...

what do you mean by that, you change the type of SATA cable you used?

 

[madmax2]

I tried SATA3 connector to SATA2 then fixed!

Thank you so much!

how to fix this?

I only have sata3 and sata6 on my board.
I tried moving the dvd to sata3 but it still ejects at bootup

 

[madmax2]

bump