DSDT Database: Non-Gigabyte Submission Thread

[Mamdouh]

Thanks for your response

I just changed my MB to Gigabyte GA-X58A-UD5 , I decided to buy it based on MacMan Build on this topic:
viewtopic.php?f=54&t=14260

I'm replying to this from my first success installation of Lion on it. Hopefully not to get any Kernel Panic anymore

 

[danielnmaldonado]

Vanilla Intel DX58SO DSDT and SSDT, extracted using acpidump (20071116-1) from Ubuntu 10.04.

Board Intel DX58SO
Processor: Intel i7-940
RAM: 2x2GB A-Data 1333 MHz

dsdt.Vitus13.zip

 

[peterhaas]

EVGA Classified E760 BIOS v8.2

DSDT.Mamdouh.zip
if you use VoodooHda, use AppleHdaDisabler in S/L/E

As a constructive suggestion, PX40 should be renamed LPCB and PX43 should be renamed SBUS.

 

[peterhaas]

As a constructive suggestion, PX40 should be renamed LPCB and PX43 should be renamed SBUS.

In addition to the above:

1) Globally change PATA to PATX (this variable is only used in the JMB0 devices, anyway, and would conflict with a subsequently suggested change),

2) globally change IDE0 to SATA, and then change, within the SATA device tree, PRIM to PRT0 and SECD to PRT1, thereby creating a pseudo SATA device tree, and, finally

3) globally change IDE1 to PATA, thereby creating a PATA device tree.

I'll not suggest changes to the HDEF device as I expect this device will be supported by Voodoo 0.2.1 and not ALC8xxHDA + 10.6.2 AppleHDA "roll-back". If not, then the usual HDEF changes would be required.

ALC8xxHDA + 10.6.2 AppleHDA "roll-back" has been confirmed to work on Lion, so there is probably no reason not to use ALC8xxHDA + 10.6.2 AppleHDA "roll-back".

Remember, this is an AMI BIOS DSDT, so the hacks are a little different than those for an Award BIOS DSDT.

 

[danielnmaldonado]

rename = no difference

into device label FWH set_label begin FWHD end;
into device label MCH set_label begin MCEH end;
into device label PIC set_label begin IPIC end;
into device label DMA1 set_label begin DMAC end;
into device label TMR set_label begin TIMR end;
into device label RTC0 set_label begin RTC end;
into device label COPR set_label begin MATH end;
into device label OMSC set_label begin LDRC end;
into device label IDE1 set_label begin SATA end;
into device label CHN0 set_label begin PRT0 end;
into device label CHN1 set_label begin PRT1 end;
into device label USB0 set_label begin UHC1 end;
into device label USB1 set_label begin UHC2 end;
into device label USB2 set_label begin UHC3 end;
into device label USB3 set_label begin UHC4 end;
into device label USB4 set_label begin UHC5 end;
into device label USB5 set_label begin UHC6 end;
into device label USB6 set_label begin UHC7 end;
into device label USBE set_label begin EHC1 end;
into device label USE2 set_label begin EHC2 end;
into device label PRIM set_label begin PRT0 end;
into device label SECD set_label begin PRT1 end

JMB0
use the same patch Asus

 

[peterhaas]

into device label IDE1 set_label begin SATA end;

SATA is 0x001F0002

PATA is 0x001F0005

 

[danielnmaldonado]

no rules
this can vary
look at the ioreg

ioreg -fl

 

[DreamMachine]

AsRock P43DE - BIOS v1.70

Extracted using "DSDT Auto-Patcher" application

 

[m00n4]

Hopefully this will help others out, now that I have it running for myself =) This is a fully edited DSDT for an EVGA P55 SLI board, BIOS version A72 (09/09/10 revision date). The on-board network is still not working (Marvell Yukon 88E8057), but the latest Multibeast says it includes support for that chipset, so hopefully soon I'll be able to tweak enough to get that working too. For now, everything else on-board works, and after turning on the related options in BIOS, speedstepping works fine on my Core i5 chip. I'm injecting an EFI string for the video (NVidia GTX 470), so that additional bit is required if you're using such a card, but this at least will get all the on-board hardware working solidly for anyone with such a board. =)

Is it possible for me to use this dsdt for my evga p55 le?
where is a good web site i can use for research I wanted to use my pc with osx for adobe study until i can afford a proper imac, thanks in advance

 

[neuroman]

EVGA P55 Micro 120-LF-E650

Here's my edited DSDT for the EVGA micro SLI motherboard later bios- 0407E from 8/08/2011. Everything works except sleep - I do not know why because P and C states are being generated on boot.
If anyone can help me with the sleep, I would appreciate it.