Dell Xps 9360 Kabylake-R High Sierra

[shiecldk]

Injecting EDID was an attempt to fix the previous blank screen problem.

I've found this git repo by dark-void: https://github.com/the-darkvoid/XPS9360-macOS, following the instructions in readme, I modified the various values accordingly (dvmt-prealloc, dvmt-max, disable cfg-lock).
Subsequently, after changing the kblframbuffer patch in my config.plist to the 80MB framebuffer one, the graphics worked

Hi, which ig-platform-id are you using?

 

[hpbrown]

Hi
I'm trying to install High Sierra on my 9360 Kaby Lake.
I managed to boot from USB, install on HDD but I have an a crash after "trying" the post installation on HDD.
I've tried to read lots of guides but I'm new to Hackintosh and a bit lost.
Can someone provide some help please?

 

[Zerui17]

Hi, which ig-platform-id are you using?

0x59160000 for the Intel UHD620 IGPU through SSDT patching.

 

[RehabMan]

Hi
I'm trying to install High Sierra on my 9360 Kaby Lake.
I managed to boot from USB, install on HDD but I have an a crash after "trying" the post installation on HDD.
I've tried to read lots of guides but I'm new to Hackintosh and a bit lost.
Can someone provide some help please?

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[hpbrown]

0x59160000 for the Intel UHD620 IGPU through SSDT patching.

thanks it works now.
I'm struggling now with HDA. This seems more complicated

 

[hpbrown]

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

thanks. I've updated my profile
is there any hope to have USB3 hot swap connectivity working? I have a docking station at the office and would prefer to avoid rebooting each time I connect/disconnect
thanks

 

[RehabMan]

thanks. I've updated my profile
is there any hope to have USB3 hot swap connectivity working? I have a docking station at the office and would prefer to avoid rebooting each time I connect/disconnect
thanks

Refer to the USB guides linked from the FAQ.