Corsair Hackintosh Build - Please Help

[TangoTaylor]

Hi All,

I have been trying to get my mackintosh up and running and the physical computer is running fine. Could install windows or linux if I wanted to but think I am having trouble getting the proper settings in Unibeast and Multibeast. Maybe my BIOS settings aren't correct (I set them to optimized).

Here are specs if anyone can help outline the various things I need to select or if there are drivers I need to upload into multibeast (if that's possible).

Motherboard: GA-B150M-D3H GSM
Processor: Intel Core i5-7600 Kaby Lake
Power Supply: Corsair CX850M
RAM: 32 gb (8gb x 4) Corsair Vengeance DDR4 White LED
Netoworking Card: TP Link AC1300
Hard Drive(s): 2x Samsung SSD 850 EVO 2.5" SATA III 250GB
GPU: EVGA GTX 970
Cooling: Corsair fans
CPU Cooling: Corsair H100i V2

When I boot load from the partition and select clover external mac os nothing happens the screen stays on but doesn't load/boot the OS.

Thank you so much.

 

[BreBo]

@TangoTaylor, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.

Profiles need to contain at least your primary system to assist others with helping you.

Did you follow the UniBeast: Install macOS Sierra on Any Supported Intel-based PC guide ?

Please note that your Kaby Lake CPU is not natively supported in macOS.
The CPU requires a FakeCPUID (with Skylake ID) to boot.
At Clover Boot Screen select Options > Binairies patching > Fake CPUID
[NEW / TESTING] Intel 7th Generation Kaby Lake CPUs + 200 Series Motherboards in macOS

 

[SnaRf777za]

I can confirm that installation works on GA-B150M-D3H using the Fake CPUID.
Attached is my MultiBeast setup as well.
Use this for Audio: https://www.tonymacx86.com/threads/solved-audio-problem-in-realtek-alc892.224175/

 

[Bob_the_Tomato]

Naming the build "Corsair" after the power supply or Ram is not as helpful as naming it after the MB, like "GA-B150M-D3H GSM"

 

[blongblond1]

I can confirm that installation works on GA-B150M-D3H using the Fake CPUID.
Attached is my MultiBeast setup as well.
Use this for Audio: https://www.tonymacx86.com/threads/solved-audio-problem-in-realtek-alc892.224175/

Could you share your EFI folder?