Correct Multibeast settings without crashing

[rexttg]

I'm hoping a seasoned professional (or anyone really) might be able to double check my mutlibeast config becuase last time I ran it I wasn't able to boot again.

My rig:
Motherboard: MSI Z87-GD65
CPU: Intel i7-4770K
Graphics card: NVidia GTX780 from EVGA (using hdmi from graphics card to a 1920x1080 monitor)
Install Drive: Internal HDD from SATA
OS Version Attempt: Sierra

My current settings:
Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Misc > FakeSMC v6.25-332-gf3a8525c.1758
Drivers > Misc > FakeSMC Plugins v6.25-332-gf3a8525c.1758
Drivers > Misc > FakeSMC HWMonitor Application v6.25-332-gf3a8525c.1758
Drivers > Misc > NullCPUPowerManagement v1.0.0d2
Bootloaders > Clover v2.4k r4063 UEFI Boot Mode
Customize > System Definitions > iMac > iMac 17,1

My questions:
- I don't have any graphics drivers selected, not sure to use "Inject NVIDIA" or "NVIDIA Web Drivers Boot Flag" because the one is supposedly for older cards but doesn't list the 780 and the other is for newer cards but again doesn't list the 780
- My current boot from the install usb runnign sierra on the internal hdd is low resolution (1280x1024) is this becuase the graphics drivers are not setup or becuase the selected System definitions (iMac vs macbook vs Mac Pro etc) is not correct?

Thanks for any and all help!
----------------------------------------------
Update: 8/14/2017 12:36 PM

Boot attempt with settings:
Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Misc > FakeSMC v6.25-332-gf3a8525c.1758
Drivers > Misc > FakeSMC Plugins v6.25-332-gf3a8525c.1758
Drivers > Misc > FakeSMC HWMonitor Application v6.25-332-gf3a8525c.1758
Bootloaders > Clover v2.4k r4063 UEFI Boot Mode
Customize > System Definitions > iMac > iMac 17,1

Boot Errors

Could it be that the system definition is incorrect?
----------------------------------------------
Update: 8/14/2017 01:20 PM

Boot attempt with settings:
Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Misc > FakeSMC v6.25-332-gf3a8525c.1758
Drivers > Misc > FakeSMC Plugins v6.25-332-gf3a8525c.1758
Drivers > Misc > FakeSMC HWMonitor Application v6.25-332-gf3a8525c.1758
Bootloaders > Clover v2.4k r4063 UEFI Boot Mode
Customize > System Definitions > iMac > iMac 14,2

Boot Success, using DVI cable resolution is also correct

 

[MacMan]

No need for NullCPUPowerManagement nor any NVIDIA selection.

You forgot an ethernet driver.

 

[rexttg]

No need for NullCPUPowerManagement nor any NVIDIA selection.

You forgot an ethernet driver.

Apologies for the late response. Firstly thank you so much for your help!

Okay so remove "NullCPUPowerManagement" and don't select anything for NVIDIA. Currently the Ethernet is working, safari works and browse the internet. I don't see anything on my motherboard specs that look similar to the selection provided by multibeast.

Also, will this fix the graphics resolution issue?
-----------------
Side note: Even the resolution of clover is incorrect. I notice when I used it from the DVI port it has the correct resolution but the hdmi is incorrect.