- Joined
- Feb 24, 2010
- Messages
- 72
- Motherboard
- GA-P55-USB3 rev1.0
- CPU
- Core i5-760
- Graphics
- R9 280X (was HD 5770)
- Mac
- Classic Mac
- Mobile Phone
Hi all,
I try to migrate my working Yosemite installation to Clover to be able to upgrade to El Capitan.
First I checked this guide, but missed an installation advice:
http://www.tonymacx86.com/basics/171680-clover-basics-switching-advice.html
The I followed the link to this guide and steps 1 and 2 to create a bootable USB stick:
http://www.tonymacx86.com/el-capita...-el-capitan-any-supported-intel-based-pc.html
Then I tried to boot Yosemite from the USB stick, which works fine.
Then I downloaded Clover 3346 from SourceForge and installed it with the post-install settings from this guide:
http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html
Then I cleaned up the Chameleon stuff by using the hints from the first link:
http://www.tonymacx86.com/basics/171680-clover-basics-switching-advice.html
And now -drum roll- my system crashes on boot with a kernel panic:
Then I thought "Well, it still boots from USB, so I'll simply use the "EFI" folder from the USB stick".
But this does not change anything, the error persists.
I'm glad that I'm able to boot with the USB stick.
Any ideas where to start?
Maybe there is an "all-in-one guide" so that one does not have to jump between the guides.
Thanks a lot.
I try to migrate my working Yosemite installation to Clover to be able to upgrade to El Capitan.
First I checked this guide, but missed an installation advice:
http://www.tonymacx86.com/basics/171680-clover-basics-switching-advice.html
The I followed the link to this guide and steps 1 and 2 to create a bootable USB stick:
http://www.tonymacx86.com/el-capita...-el-capitan-any-supported-intel-based-pc.html
Then I tried to boot Yosemite from the USB stick, which works fine.
Then I downloaded Clover 3346 from SourceForge and installed it with the post-install settings from this guide:
http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html
Then I cleaned up the Chameleon stuff by using the hints from the first link:
http://www.tonymacx86.com/basics/171680-clover-basics-switching-advice.html
And now -drum roll- my system crashes on boot with a kernel panic:
Code:
"Unable to find driver for this platform: \"ACPI\".\n~@/SourceCache/xnu/xnu-2782.50.1/iokit/Kernel/IOPlatformExpert.cpp:1590"
Then I thought "Well, it still boots from USB, so I'll simply use the "EFI" folder from the USB stick".
But this does not change anything, the error persists.
I'm glad that I'm able to boot with the USB stick.
Any ideas where to start?
Maybe there is an "all-in-one guide" so that one does not have to jump between the guides.
Thanks a lot.