Contribute
Register
Status
Not open for further replies.
if you have made changes, then you will need to re upload new problem reporting files

read the faq for proper procedure of what files should be uploaded

Please check attached Provlem reporting files. Thank you

1571663130337.png
 

Attachments

  • CLOVER.zip
    4.1 MB · Views: 53
if you have made changes, then you will need to re upload new problem reporting files

read the faq for proper procedure of what files should be uploaded

Sorry, sending you again
 
Please check, I have pressed F2 as its showing me to only F2 option at boot screen.
 

Attachments

  • CLOVER.zip
    4.1 MB · Views: 63
Please check, I have pressed F2 as its showing me to only F2 option at boot screen.
is the latest one you may want to try

check the laptop guide to see what should be in drivers64UEFI folder

also use a config,plist from the laptop guide as well
 
is the latest one you may want to try

check the laptop guide to see what should be in drivers64UEFI folder

also use a config,plist from the laptop guide as well

Thanks for your help.
I have used "config_UHD630.plist" as mentioned in laptop guide "https://www.tonymacx86.com/threads/guide-acer-swift-5-sf514-53t-whiskey-lake-macos10-14-5.277618/"

and used Clover UEFI Boot Mode v2.4k r4961

Now its not stucking over PCI configuration BEGIN.
Please check reporting files.
Thank you.
1571724023316.png
 

Attachments

  • CLOVER.zip
    5.1 MB · Views: 87
I have also checked by using other config.plist but same issue as above. Please check and help.

Thanks
 
Hi iOS.mac.mini
do you have a working clover for me.
I've been trying for a few weeks.
Thanks
 
Status
Not open for further replies.
Back
Top