- Joined
- Oct 13, 2015
- Messages
- 51
- Motherboard
- Gigabyte x99 UD5 WIFI
- CPU
- Intel i7-5820K
- Graphics
- Radeon RX 580 8 GB graphics
- Mac
- Mobile Phone
Hey, I am able to boot into Yosemite, from an installation I did through Unibeast 5.2.
The flags I use are: npci=0x2000 nvda_drv=1 -x -v
or: npci=0x2000 nv_disable=1 -x -v
(the nvidia drivers work but take alot of time to load)
I am only able to boot in safe mode, not sure if that has something to do with it.
When I download Clover and try to install (v2.3k_r3280), with the following settings:
* Install for UEFI booting only
* Install Clover in the ESP
- Drivers64UEFI
* EmuVariableUefi-64
* OsxAptioFixDrv-64
On the final installation step if fails:
Not sure what to do at this point.
I tried booting without -x but it hangs at this point:
The flags I use are: npci=0x2000 nvda_drv=1 -x -v
or: npci=0x2000 nv_disable=1 -x -v
(the nvidia drivers work but take alot of time to load)
I am only able to boot in safe mode, not sure if that has something to do with it.
When I download Clover and try to install (v2.3k_r3280), with the following settings:
* Install for UEFI booting only
* Install Clover in the ESP
- Drivers64UEFI
* EmuVariableUefi-64
* OsxAptioFixDrv-64
On the final installation step if fails:
Not sure what to do at this point.
I tried booting without -x but it hangs at this point: