Cannot fix BluetoothHCIController on my build :( Please help

[avshelin]

Hello dear friends!

I know this is the most common error, however I cannot get past it despite all the advice that I found on the web.

My build is:

CPU: Intel G 630 (http://ark.intel.com/products/53483/Intel-Pentium-Processor-G630-3M-Cache-2_70-GHz)
MB: ASRock H61M-VG3 (http://www.asrock.com/mb/Intel/H61M-VG3/)
RAM: Transcend 4 GB DDR3
HDD: Seagate Barracuda 1.5 TB

I am planning to use the integrated GPU (I have chosen a slim mATX case, no room for a dedicated GPU). Planning to install Yosemite 10.10, created a bootable flash drive with latest UniBeast (7.4). When I start the installation, the Apple logo appears, loads till about 15-20% and then stops. In -v mode I found that it stops at the classical "BluetoothHCIController -Completed".. Used all the recommended flags, but no success.

Maybe I've missed something or the hardware is incompatible?

This is my first Hackintosh, wanted to make a bugdet present for my father as his Mac Mini is way to old and useless.

Any help appreciated!

Looking forward to hear your suggestions!

 

[defbref]

Your CPU doesn't have compatible graphics, (I'm not sure if its compatible at all).

You will need a compatible GPU.

 

[avshelin]

Ahhhh sh*t Anybody know any way to bypass this? Except for upgrading to a CPU with better GPU or adding a dedicated GPU?

 

[RehabMan]

Ahhhh sh*t Anybody know any way to bypass this? Except for upgrading to a CPU with better GPU or adding a dedicated GPU?

You listed the only two solutions.

Success with OS X always begins with compatible hardware.