You can try adding the BCM94360CD device-id (0x43a0) to OpenCore config.plist or to your Clover config.plist, so the card is recognised and possibly activated in an earlier version of macOS. The device-id entry might look something like the DeviceProperties entry for my Broadcom WiFi card below.
View attachment 561045
The Device Path, slot name, type and model entries can be obtained from Hackintool > PCIe tab, using the Export function. Then Copied to your system config.plist's DeviceProperties section.
The device-id and built-in entries would need to be manually added. This example is shown in an OC plist viewed in ProperTree plist editor.
You could also try adding the AirportBrcmFixup.kext boot argument to your config.plist:
brcmfx-driver=1 this enables/pushes the AirPortBrcm4360 kext for loading.
0 - AirPortBrcmNIC-MFG,1 - AirPortBrcm4360,2 - AirPortBrcmNIC,3 - AirPortBrcm4331
These are the Broadcom WiFi kexts that function in Mountain Lion, Mavericks & Yosemite, with the corresponding card device id's listed against each kext.
View attachment 561044
With near LOS (it's behind a TV) to a 802.11ax Wifi 6 Ubiquiti WAP, I get 214/135.Same issue as before - I can see my MX Master 3 mouse, but I cannot connect to it - just shows spinny progress indicator forever.
Speedtest.net:
(Used Stats to confirm no network activity during tests)
USBC Ethernet Dock on gigabit home ethernet to gigabit provider fiber: 249/337.
DW1830 to Unifi / Ubiquiti hardware: 71/49.
DW1830 to provider's router: (paused to let ads load without a pihole): 17/27, then 7/8, then 12/34.
DW1830 to Unifi / Ubiquiti hardware (again): 62/72
I'm two American inside walls away from both WAPs.
No, you currently can't differentiate DeviceProperties by a range of kernels.is there a way to create a deviceproperties entry for a range of kernels, like the kext loading? probably not?
Try LocalSend https://localsend.org/# It is free for both Mac and iPhone. You can transfer files. Be lucky your bcm network card works in Sonoma, without OCLP and SIP off.Dear Folks, My BCM20703 card still working on Sonoma Bluetooth and WiFi both working. However, I lost AirDrop. It doesn't recognize my iPhone or iPad. My iPhone also can't see it. Anyone same can teach how to fix it please?
View attachment 574545View attachment 574546View attachment 574547
What's the point of Intel AX(XXX) if you still lost AirdropBroadcom on Somoma will only work correctly with OpenCore Legacy Patcher. I would suggest you get an Intel AX(XXX) and do not manipulate your installation by modifying the Kernel. Or downgrade back to Ventura.