Black screen screen on restart after installing Geforce-Kepler-patcher-V4 and OpenCore-Legacy-Patcher - Monterey

[trs96]

What output do you use on the 710 ? Do you adapt it to anything different ? VGA ?

 

[ehsdeveloper]

I m using VGA not HDMI

What output do you use on the 710 ? Do you adapt it to anything different ? VGA ?

 

[trs96]

I m using VGA not HDMI

VGA will probably not work. Test it out with HDMI connected to a TV if you might.

 

[ehsdeveloper]

VGA will probably not work. Test it out with HDMI connected to a TV if you might.

Sure will have look around it

 

[ehsdeveloper]

VGA will probably not work. Test it out with HDMI connected to a TV if you might.

With HDMI it loaded properly but it seems some legging it not working normally like I have used in Catalina, is there any solution for that ?

 

[trs96]

With HDMI it loaded properly but it seems some legging it not working normally

What is lagging ? Do you have graphics acceleration or is it something else ?

 

[ehsdeveloper]

What is lagging ? Do you have graphics acceleration or is it something else ?

it takes seconds after clicking something to execute

 

[trs96]

it takes seconds after clicking something to execute

What kind of drive is your boot drive ? SSD or mechanical HDD ?

 

[ehsdeveloper]

What kind of drive is your boot drive ? SSD or mechanical HDD ?

It's SSD

 

[trs96]

It's most likely that you have no CPU power management working. Sandy Bridge systems are not ideal for running Monterey. You also have a lower end Core i3 CPU (dual core) that is not going to handle Monterey that well even with CPU PM.

You can try and follow all the steps here: https://dortania.github.io/OpenCore-Install-Guide/config.plist/sandy-bridge.html#starting-point
and see if that helps improve the lag. It might work. Don't know for sure as I've not installed Monterey on my Z68.