Contribute
Register

Asus Prime Z490-A + i7-10700k + iGPU 630 + OC 076

Status
Not open for further replies.
iRiChSdc

iRiChSdc

Joined
Apr 11, 2011
Messages
14
Motherboard
Gigabyte GA-Z390 Aorus Pro
CPU
i9-9900K
Graphics
RX 580
Mac
  1. MacBook Air
Classic Mac
  1. iBook
Mobile Phone
  1. iOS
Hello
with this motherboard and i7-10700k processor does iGPu work? It is for a friend who does not have any dGPU at the moment...
thank you
 
okei thanks!
 
Hi!
I am building this EFI with OC 0.7.6 for
i7-10700k
iGPU UHD 630
Asus Prime z490-A
Motenrey 12.1
The problem is, I don't know if it will be okay because I can't test it right now. If someone helps me finish, I would be very grateful.
thank you
 

Attachments

  • EFI.zip
    17.3 MB · Views: 160
done!
 
hi I am using Asus Z490P with Asus RX580 on OC 0.7.3.
For some reasons, I can't update to Monterey with current config,
but the in bios, the main GPU is iGPU, in Mac SMBIOS it is iMac 2020, so the main GPU is RX580 and internal also enabled (for video work).
 
JacCarson said:
hi I am using Asus Z490P with Asus RX580 on OC 0.7.3.
For some reasons, I can't update to Monterey with current config,
but the in bios, the main GPU is iGPU, in Mac SMBIOS it is iMac 2020, so the main GPU is RX580 and internal also enabled (for video work).
Click to expand...
Hi JacCarson,

You can try looking at my EFI build here for the Z490 Aorus Xtreme under Monterey
> https://www.tonymacx86.com/threads/asus-prime-z490-a-i7-10700k-igpu-630-oc-076.318045/#post-2314937

I use OC 0.6.8. but you can check using OC Compare to see if there are any major differences between the builds.
I am not sure but it seems to me your SMBIOS is different. I use Mac Pro7,1 on mine. If you are using your AMD as your main GPU you must enable agdpmod=pikera in the boot-arg settings but also ensure that under the Intel IGPU PCIRoot device property settings you are using a 03 connector to enable the Intel Quicksync for your Intel IGPU.
ie. AAPL,ig-platform-id 03009BC5; device-id 9BC50000.
 
Hoist
Other |  i5 7500 |  HD 530
Mirage (Acer Nitro 5)
Z370 Extreme4 |  i7 8700K |  GeForce GTX 1050 Ti
Rodimus Prime
Z490 Aorus Xtreme |  i5 10500 |  GeForce GTX 1060 WindForce OC 6GB
Arcee
Z490 Vision D |  i7 9700 |  Radeon Other
Middleman said:
Hi JacCarson,

You can try looking at my EFI build here for the Z490 Aorus Xtreme under Monterey
> https://www.tonymacx86.com/threads/asus-prime-z490-a-i7-10700k-igpu-630-oc-076.318045/#post-2314937

I use OC 0.6.8. but you can check using OC Compare to see if there are any major differences between the builds.
I am not sure but it seems to me your SMBIOS is different. I use Mac Pro7,1 on mine. If you are using your AMD as your main GPU you must enable agdpmod=pikera in the boot-arg settings but also ensure that under the Intel IGPU PCIRoot device property settings you are using a 03 connector to enable the Intel Quicksync for your Intel IGPU.
ie. AAPL,ig-platform-id 03009BC5; device-id 9BC50000.
Click to expand...
Thanks! I will try it. Seems that Asus Z490p has some inherent flaws regarding igpu in bios. People with windows only installation report strange behavior in bios, which i see too. Mainly, you cannot choose pcie as a main card in bios, mainboard resets with each reboot and defaults to igpu. That happens to me too but when opencore starts, software makes card a main gpu. So i have hdmi from rx580, but i get video with apple logo only after some time after the boot. People say that also powersupply might be at fault for such behavior.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top