- Joined
- Mar 30, 2019
- Messages
- 12
- Motherboard
- ASUS Prime X299 Deluxe II
- CPU
- i9-9940X
- Graphics
- Gigabyte RX Vega 64
- Mac
- Mobile Phone
Last time I tried Hackintoshing was back in the Chameleon days with 10.4-10.5 I think! So forgive me if I'm a little behind on a lot of things ... Been catching up on here and thank you to all of you who have contributed! Much appreciated.
So I've managed to get Mojave running somewhat on this old machine I bought for approx. 100$ (T3500) using Clover (V4769) as well as Lilu, Whatevergreen & AppleALC kexts. Have a few issues that I've been working on. Just managed to fix one of them ...
Screen output is working off 7950 DVI and HDMI with audio too (AppleALC thx!), but only if I have my old GT120 (from Mac Pro) card installed as primary graphics adapter. Still working on this ... got framebuffer patch kext fix to work in HS but doesn't in Mojave anymore. Any pointers are welcome ...
Main reason I'm posting is because I was also having this CMOS reset issue with the BIOS being reset to defaults on every boot.
Figured out that the AppleRTC patch was not working anymore with this version of Clover and Mojave. Debug showed it wasn't being patched.
So I took a 10.13 version of AppleRTC.kext and just dumped the info.plist and version.plist from the Mojave version into the kext, and then replaced the one in S/L/E with the hacked together one, and then the RTC patch seemed to work again!
Hope this might help someone too .... Back to work. No rest for the ...
So I've managed to get Mojave running somewhat on this old machine I bought for approx. 100$ (T3500) using Clover (V4769) as well as Lilu, Whatevergreen & AppleALC kexts. Have a few issues that I've been working on. Just managed to fix one of them ...
Screen output is working off 7950 DVI and HDMI with audio too (AppleALC thx!), but only if I have my old GT120 (from Mac Pro) card installed as primary graphics adapter. Still working on this ... got framebuffer patch kext fix to work in HS but doesn't in Mojave anymore. Any pointers are welcome ...
Main reason I'm posting is because I was also having this CMOS reset issue with the BIOS being reset to defaults on every boot.
Figured out that the AppleRTC patch was not working anymore with this version of Clover and Mojave. Debug showed it wasn't being patched.
So I took a 10.13 version of AppleRTC.kext and just dumped the info.plist and version.plist from the Mojave version into the kext, and then replaced the one in S/L/E with the hacked together one, and then the RTC patch seemed to work again!
Hope this might help someone too .... Back to work. No rest for the ...