AppleHDA HDMI Audio [Guide]

[toleda]

But it says

See Post #1/IV. Problem Reporting; attach all requested files

 

[dziny]

Wrong EFI partition mounted, try again.
Reply with new files.

I wish you were right but my other disk's EFI partition does not contain CLOVER nor any config.plist just debian/opewrt-lede files. So your script would not execute on it.

Martins-iMac:~ mxxxxxx$ ls -l /Volumes/EFI2/
total 11784
drwxrwxrwx  1 mxxxxxx  staff     4096 14 Nov  2017 1e760a61aed145ebad990ec0a175b23d
drwxrwxrwx  1 mxxxxxx  staff     4096 14 Nov  2017 EFI
drwxrwxrwx  1 mxxxxxx  staff     4096 14 Nov  2017 loader
-rwxrwxrwx  1 mxxxxxx  staff  2775472 14 Nov  2017 vmlinuz-old.lede
-rwxrwxrwx@ 1 mxxxxxx  staff  3239984  3 Sep 20:30 vmlinuz.lede
Martins-iMac:~ mxxxxxx$ ls -l /Volumes/EFI2/EFI/
total 24
drwxrwxrwx  1 mxxxxxx  staff  4096 14 Nov  2017 BOOT
drwxrwxrwx  1 mxxxxxx  staff  4096 14 Nov  2017 debian
drwxrwxrwx  1 mxxxxxx  staff  4096 14 Nov  2017 systemd

Here is the EFI partition of my OSX disk

Martins-iMac:~ mxxxxxx$ ls -l /Volumes/EFI/EFI/
total 9
drwxrwxrwx  1 mxxxxxx  staff   512 16 Aug 23:12 APPLE
drwxrwxrwx  1 mxxxxxx  staff   512 25 Sep 23:59 BOOT
drwxrwxrwx  1 mxxxxxx  staff  1536 28 Sep 23:49 CLOVER
-rwxrwxrwx  1 mxxxxxx  staff  1556 25 Sep 23:59 Clover_Install_Log.txt

 

[toleda]

So your script would not execute on it.

Script output:

Download HD6000 HDMI audio connector edits ...
HDMI audio edited /Volumes/EFI/EFI/CLOVER/config.plist installed

Where did the patch go?

Fix: using Xcode, copy the the t2-10.10-10.11-BDW02040a-Port_0x6-DP2HDMI patch from the edited config.plist in the thread to you linked to your current config.plist.

 

[dziny]

Fix: using Xcode, copy the the t2-10.10-10.11-BDW02040a-Port_0x6-DP2HDMI patch from the edited config.plist in the thread to you linked to your current config.plist.

I've done that (see the config.plist) that is attached. Still no audio devices present after a reboot. All debug files are also attached.

 

[toleda]

Still no audio devices

Patch is working
Set config.plist/Graphics/Intel/NO
Restart, reply with new files

 

[dziny]

Patch is working
Set config.plist/Graphics/Intel/NO
Restart, reply with new files

Can't see any difference.

 

[toleda]

Can't see any difference

VirtualBox?

 

[dziny]

VirtualBox?

Mojave is running directly on the hardware. I do have virtual box autostart running for one linux terminal only instance.

Edit: Just to add, I have not changed the setup from the previous OS (Sierra) - I also had the same linux instance autostarting at boot and had no sound issues. Just to be sure, I've disabled it now and rebooted - no change.

 

[toleda]

no change.

There is a change in Mojave audio and is not understood at this time.
Fix: see Mojave AppleHDA Audio/Post #1/B. Acidanthera/AppleALC
Install, restart, reply with new files

 

[aguacristalina999]

1. Monitor connected but it doesn’t appear in the sound preferences

In the same computer with other HDD and High Sierra is OK

2. Mojave Gigabyte Z170 HD3P Bios last version Processor I3-6100 Graphic NVIDIA GeForce GT 740

3. After installation, audio_CloverHDMi-140_v.01 executed, reboot with Multibeast 10.4 install ALC887/888B drivers

4. S/L/E/AppleHDa.Kext. enclosed

5. IOReg. In zip file

6 and 7. In zip file

8 MaciaSL . Doesn’t run because this error:

oading Acpi table from file iASL3sFYvX.aml

Acpi table [DSDT] successfully installed and loaded

Pass 1 parse of [DSDT]



9. and 10 in the zip file