RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,056
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
indeed, you have some code (DropOEM=true) in config.plist which basically says 'ignore the files provided by the motherboard and instead look at my Clover/ACPI/patched folder for 'replacement' files'................
but you dont have any files in Clover/ACPI/patched so we need to populate this folder with the files extracted from your motherboard (Clover F4 method and then selection as per post 92)................
.................or remove DropOEM=True from your config.plist file.
My clover folder (as supplied to you) has DropOEM=true and 'MY' motherboard files (DSDT/SSDT but not the ones with x in the name (Dynamic) or SSDT3 (which has bits of USB data in it)
i havent tried my installer without the 'patched' elements as this was part of the 'fault finding' process for me.
it may be that i just needed the USB Port limit fix instead because i was using a USB 3.0 stick instead of USB 2.0?
As a test, try with DropOem=false, no files in ACPI/patched, and drop the problematic SSDT (SSDT-3) with the Clover GUI.
It should be the same as what you did (DropOem=true + all DSDT/SSDT as extracted except SSDT-3 in ACPI/patched).