Righty, so here's where I'm at with installing 10.9:
Firstly, my spec is i3-2367M / HM77 / Bios 1.09.
Unibeast 10.9 Install (Laptop Support + Legacy USB Support), needs -v -x flags to boot into installer. (Really temperamental, worked first time fine then not other times...)
First time in OSX tried:
- Multibeast: EasyBeast / MacBook Pro 8,1 / TrackPad Support
No Boot, AppleIntelHD kext errors, so moved all the AppleIntelHD kexts out of S/L/E temporarily and can now boot into the OS without flags.
Next tried a few kext installs etc to get some devices working, so far:
- WiFi: Installed a Dell DW1510 instead of Atheros AR5822 card, works by default.
- LAN: Installed BCM57785 kext from (
http://www.insanelymac.com/forum/files/file/79-bcm5722d/), works fine.
- USB: Plugging in a device caused a reboot, had to install AppleUSBXHCI.kext (
http://www.insanelymac.com/forum/files/file/150-patched-appleusbxhcikext/), working fine now, interested to find out if can patch the DSDT to avoid this step.
- Trackpad: Buttons don't work this Multibeast kext (Voodoo based kext?), need to try find a better version.
- Audio: Not tried yet, get the graphics working properly first.
Now trying to put back the AppleIntelHD kexts to try boot with graphics support, no luck so far though. Am using MaciASL to try edit the DSDT with RehabMan patches, using 'TNOT Error Fix' and 'HD3000 on 7 Series' gets me further when booting in verbose (no more AppleIntelHD failed to start error), just now it's getting stuck at 'SuperIODevice fatal error' so need to find out what to patch next.
Any info from others managing to run 10.9 would be great