BoomR's “Power UP” for 360/VR Production Build: GA-Z370 AORUS UG - i7 8700K - GA AORUS RX580

yellocab · Mar 22, 2018

No. I use white and static

LeleTuratti · Mar 22, 2018

Last thing, what kext do you have in EFI/Kext/Other and Library/Extensions?

yellocab · Mar 22, 2018

Stork said:
CodecCommander should be in /Library/Extensions/ where it works fine. User KextBeast to move the CodecCommander.kext to /L/E/.

True and mine is in L/E/ sorry.

yellocab · Mar 22, 2018

LeleTuratti said:
Last thing, what kext do you have in EFI/Kext/Other and Library/Extensions?

Not sure that NVWebLibValFix.kext is usefull. Need to try to boot without or block it.

Nothing else. As i said it's a clean install. No USB injection so my USB ports are certainly running at the wrong speed.

EDIT: i can boot without NVWebDriverLibValFix.kext

yellocab · Mar 22, 2018

My Drivers64UEFI folder contain:

yellocab · Mar 22, 2018

Stork said:
Why not use Uni/MultiBeast? They work fine with High Sierra. They sure make life simpler.

Not so hard but i'm using a method from a french forum (macbidouille). Really clean but you need to pick up all the kexts you need on your own.

LeleTuratti · Mar 22, 2018

@yellocab I discovered that if the computer goes to sleep the LEDs go out, but if I turn off the computer, no.
So I went into Peripherals/RGB Fusion and I selected always OFF, so I turned definitively off my Christmas tree permanently! :lol:

Inoran said:
Any problems with Final Cut X and High Sierra?

I know Final Cut X has been updated for High Sierra, so there should not be any problems.

LeleTuratti · Mar 23, 2018

@BoomR I did a last test and I found the solution, the real one! Thanks to @yellocab for the help!
Now the leds are off when the computer is in sleep or switched off.
The culprit is FixShutdown in clover!

Then changes in Config.plist:
- Acpi > Uncheck FixShutdown
- Boot > Set darkwake=8

Bios settings:
- Peripherals > LEDs in sleep, Hibernation, and Soft Off States: OFF
- Power > ErP: Enabled

No other changes are necessary, et voila!

yellocab · Mar 23, 2018

LeleTuratti said:
@BoomR I did a last test and I found the solution, the real one! Thanks to @yellocab for the help!
Now the leds are off when the computer is in sleep or switched off.
The culprit is FixShutdown in clover!

Then changes in Config.plist:
- Acpi > Uncheck FixShutdown
- Boot > Set darkwake=8

Bios settings:
- Peripherals > LEDs in sleep, Hibernation, and Soft Off States: OFF
- Power > ErP: Enabled

No other changes are necessary, et voila!

parfait!!
great

BoomR · Mar 24, 2018

LeleTuratti said:
@BoomR I did a last test and I found the solution, the real one! Thanks to @yellocab for the help!
Now the leds are off when the computer is in sleep or switched off.
The culprit is FixShutdown in clover!

Then changes in Config.plist:
- Acpi > Uncheck FixShutdown
- Boot > Set darkwake=8

Bios settings:
- Peripherals > LEDs in sleep, Hibernation, and Soft Off States: OFF
- Power > ErP: Enabled

No other changes are necessary, et voila!

BRAVO! Many thanks for all your hard work!!

...and my apologies for not being more active here this past week or so. I was traveling for work, and then got snowed in while in NYC/NJ area. So I wasn't able to check/test things on my build & chime in...
:beachball:

Search

BoomR's “Power UP” for 360/VR Production Build: GA-Z370 AORUS UG - i7 8700K - GA AORUS RX580

yellocab

LeleTuratti

yellocab

yellocab

yellocab

yellocab

LeleTuratti

LeleTuratti

yellocab

BoomR

Moderator

Forum

Guides

Downloads