Recent content by piter2619

  1. piter2619

    Mavericks: Native CPU/IGPU Power Management

    I have "Number 0x1240105" under AppleACPIPlatformExpert/CPU0@0/AppleACPICPU/ACPI_SMC_PlatformPlugin/AICPMVers
  2. piter2619

    Mavericks: Native CPU/IGPU Power Management

    Hi Toleda, thanks for this tutorial, here's a problem I'm having on my laptop. Problem Report: 1. PM seems to work properly, but if I issue the command cat /var/log/system.log | grep "AICPUPMI:" I can see only 5 P-States instead of 16 contained in my SSDT; also Console/Search: XCPM is empty...
  3. piter2619

    can't boot without unibeast usb stick

    I ran multibeast, this is the .mb file I used. Then rebooted and blank hdd (no error messages, anything) while if I plug in unibeast usb everything works fine...I don't know why probably there's a problem with my laptop
  4. piter2619

    can't boot without unibeast usb stick

    I see but maybe I didn't explain my problem properly, so let's clarify my situation: without unibeast usb plugged in, it behaves like if you try to boot a blank hdd, so I can't even try to boot verbose because nothing appears and I can't do anything.
  5. piter2619

    can't boot without unibeast usb stick

    Ok, so I did a little mistake during installation; I didn't run gptsync /dev/sda before installing windows, that's why it wasn't possible to install in a GPT partition without UEFI boot support. Indeed I tried since following your guide here...
  6. piter2619

    can't boot without unibeast usb stick

    Hello all, i've successfully installed Mavericks via unibeast installation, then ran multibeast and finally...no bootloader at all!!! All information concerning my sandy bridge laptop is written on my profile; here's what I've done so far: 0) gpt (guid) partitioned my hdd throught disk...
  7. piter2619

    boot fail after dsdt multibeast

    yes..if multibeast doesnt work you just have to use other tools..for example the problem for me was that i had to modify the dsdt and put a flag on chameleon for the ssdt..then to make the sleep properly working i had to patch the appleintelcpupowermanagement.kext and something else which now i...
  8. piter2619

    wake reason: glan ehc1 ehc2

    well, i've followed this post http://www.tonymacx86.com/laptop-compatibility/51019-update-alc-269-patch-applehda-may-work-idea-others.html and, since i have alc269 i've just downloaded the file AppleHDA_10.8_Patched.zip then applied the dsdt patch suggested above and that's it..audio fully...
  9. piter2619

    wake reason: glan ehc1 ehc2

    can you please link me the patch you used? let's try maybe in my laptop works
  10. piter2619

    wake reason: glan ehc1 ehc2

    Hello Finally I'm able to boot without the NullAppleIntelCPUPowerManagement !!! :D I've extracted the SSDT tabe, put it in /Extra folder then unselected Generate P C States flags then selected DropSSDT flag and thats it Now..The sleep is properly working, just the pc wakes up...
  11. piter2619

    where to put dsdt.aml

    did it ! put it on the /Extra as well as the smbios and the org.chameleon and now it boots with the custom dsdt thanks for reply
  12. piter2619

    where to put dsdt.aml

    my question is: where do i have to put the dsdt.aml file in order to be loaded at boot by the unibeast usb bootloader? thanks
  13. piter2619

    boot fail after dsdt multibeast

    Hello everyone i installed mountain lion on my mbr partition with unibeast method and everything was working fine except the sleep function, so i decided to use multibeast user dsdt for post installation.. i've extracted the dsdt directly from my motherboard with dsdt editor and put it on the...
Top