Recent content by ixus888

any of the three Realtek RTL8111 will work.

I can say that Z68XP-UD3 is ok with Sierra though I'm not sure about the graphics card. Mine is Radeon HD 6850 and it works OOB.

just thinking whether the device id can be injected into the other kext liked 4331.kext or 4360.kext.

Hi, I have this BCM4318 wireless LAN controller (PCI). It was working in MLion. I have upgraded to Sierra. Everything works except no wifi because the kext 43224 is missing in Sierra. I attached the IOReg and other file here. Please help. Currently, I'm using Edimax EW-7811un adapter instead.

Tested Edimax EW-7811Un USB adapter on Sierra and it works. I used the installer from EW-7811Un_Mac_driver_v1.0.1.4. After installing, it will restart the macOS. When you next boot up, you will see an icon on the top right corner. Setup the wifi and enter your password. It works!

Article: MultiBeast 5.5 Update removed the GenericUSBXHCI.kext from S/L/E folder. Run kext utility. Reboot. Run MB and then select USD3.0 driver only. Reboot and you should have your USB3.0 back.

Article: OS X 10.8.5 Update resolved the USB3.0 issue. Quite simple. In 10.8.5, removed the GenericUSBXHCI.kext from S/L/E. Repair with kext utility. Reboot and back to desktop. Using MB 5.5.2, install only the USB3.0 driver. Reboot and it is resolved.

open your cpu case and see the inscription on the motherboard...

Had the same motherboard but not ivy bridge CPU...

Article: UniBeast: Install OS X Mountain Lion on Any Supported Intel-based PC U need to use the Mac with the ML app and unibeast to make the USB. Then with the Unibeast USB to install ML into your hackintosh...

I don't think the bios is F1. It should be U1g(UEFI BIOS) or F10. Mine was F9 and upgraded to U1g(UEFI BIOS). No need DSDT anymore. Had been running ML for 6 months and ok. But my graphics card is HD 5770... After installing the OSX, I switched graphics card to HD 6850.

if your graphics card is HD6850, you will need to use the internal graphics or remove the HD6850 and use another card such as HD5770... check out the thread on HD6xxx card...

it's normal. Just be patient...

checked the guide for 6xxx card... If you have a spare card say HD5770, you can install ML using this card... after which, you can replace your HD6870 card... there is something wrong with HD6xxx card on unibeast... Googled and you can see the solutions....

No problem for me. I upgraded to UEFI bios and it works... Google and you can find the solution.... For ML installation, my card is HD6850, so I used my spare HD5770 to install ML using unibeast... then replaced the card to HD6850... using Multibeast to load the rest... no need DSDT...