Recent content by edmoncu

  1. edmoncu

    Not Booting to High Sierra Installer, Clover Boot Loop

    I am experiencing the same behavior at installing High Sierra on my Aurora R4 with the following specs CPU - E5 2670 BIOS - A11 GPU - 980Ti
  2. edmoncu

    Solved > [Guide] DX58SO Mojave Successful installation

    Hi there, Here are my key PC specs: Intel DX58SO (5600 BIOS) Default options with these changes Default SATA AHCI 3rd party SATA - disabled VT options - disabled UEFI - enabled Intel i7-930 @ stock Intel X-25 40gb SATA SSD (on port 1) nVidia GTX 980 Ti Here are the steps: Had to have an...
  3. edmoncu

    Solved > [Guide] DX58SO Yosemite Successful installation

    Here's my video of it in action
  4. edmoncu

    Solved > [Guide] DX58SO Mojave Successful installation

    Here's my video of it in action
  5. edmoncu

    Solved > [Guide] DX58SO Yosemite Successful installation

    Just for fun, my GeekBench scores (lowend i know, lol) - https://browser.geekbench.com/v4/cpu/12870652
  6. edmoncu

    Solved > [Guide] DX58SO Yosemite Successful installation

    You may add the following to your /Extra/org.chameleon.Boot.plist <key>Graphics Mode</key> <string>1920x1080x32</string> <key>Quiet Boot</key> <string>Yes</string> The next time the HDD boots, it will be quicker and will seem to behave like the real deal :)
  7. edmoncu

    Solved > [Guide] DX58SO Yosemite Successful installation

    Hi there, Here are my key PC specs: Intel DX58SO (5600 BIOS) Default options with these changes Default SATA AHCI 3rd party SATA - disabled VT options - disabled UEFI - enabled Intel i7 930 @ stock Intel X-25 40gb SATA SSD (on port 1) nVidia GTX 980Ti Here are the steps: Had to have an...
  8. edmoncu

    Solved > [Guide] DX58SO Mojave Successful installation

    Hi there, Here are my key PC specs: Intel DX58SO (5600 BIOS) Default options with these changes Default SATA AHCI 3rd party SATA - disabled VT options - disabled UEFI - enabled Intel i7 930 @ stock Intel X-25 40gb SATA SSD (on port 1) nVidia GTX 980Ti Here are the steps: Had to have an...
  9. edmoncu

    Intel DX58SO Yosemite 10.10

    i tried doing this method on a freshly installed 10.10.5. I was able to boot onto a unibeast setup 10.10.5 installation and install yosemite from the USB onto my SSD I was able to boot onto the SSD by booting off the unibeast usb I installed multibeast importing the file from the thread that...
  10. edmoncu

    El Capitan on Intel DX58SO

    just bumping up this thread... i just got this motherboard and i wanted to install El Capitan on this. Are there any advise I need before pursuing installing this? or shall i be better use an older OS X for this motherboard?
  11. edmoncu

    Fuzzy screen on boot with HD4600

    In my case, I waited for 20 or so seconds of that noise screen and the display fixes by itself.
  12. edmoncu

    CustoMac Mini 2013: GA-H87N-WIFI - Core i3-4340 - Intel HD 4600

    Btw, sound problems? Try this: http://www.tonymacx86.com/articles/143717-article-multibeast-7-0-update-8.html#post887583 Put in org.chameleon.Boot.plist <key>Kernel Flags</key> <string>kext-dev-mode=1</string>
  13. edmoncu

    CustoMac Mini 2013: GA-H87N-WIFI - Core i3-4340 - Intel HD 4600

    I waited around 20 seconds and the display suddenly went back ok.
  14. edmoncu

    CustoMac Mini 2013: GA-H87N-WIFI - Core i3-4340 - Intel HD 4600

    trying to go extreme and minimalist specs: GA-H87N-WIFI (10-15 watts ?) i3 4350 CPU (54 watts) Thermaltake Slim X3 (from motherboard watts ?) 1x Ballistix 8gb DDR3 1600 (3-5 watts ?) Samsung 120gb 840 Evo (3-5 watts ?) InWin BQ660 (80w) ...still waiting for my CPU to arrive :D...
  15. edmoncu

    Can anyone suggest a case for my machine?

    Just to add. I am building one now based from these specs: http://www.tonymacx86.com/422-building-customac-buyer-s-guide-may-2014.html#mini Here are the changes with my rig: Case : InWin BQ660 (with 80w PSU) CPU : i3 4350 Haswell RAM : 1x 8gb Ballistix no HDD no WiFi Card...
Top