This guide is good for me?
Asus P9 X79le - 4930k cpu - nvidia gforce 285
I had the same problem with my Gigabyte GA-X79-UD5 but I got it working with these boot flags:
PCIRootUID=1 acpi=off npci=0x2000 darkwake=0
hope that helps.
Should i add the whole
PCIRootUID=1 acpi=off npci=0x2000 darkwake=0
under kernal flags?
only problem i cant make it stable like 10.8.2
my speck
Ga-x79s-up5,3930k,32 gb 1866 quad chanel and intel 520 ssd,evga 670 2gb graphic card.
only problem comes after post installation even my graphic enabler no
i m running 10.8.2 is perfect problem coming with 10.9 after post instation with kernal flags i thing coz in guide its says add under kernal flags ncpi=0x3000 still cant boot properly after restart its stuck on apple logo and goes black screenYour graphics card is not well supported on 10.8.2, try using the combo update to 10.8.3 as a minimum:
http://www.tonymacx86.com/317-os-x-10-8-3-update.html
http://www.tonymacx86.com/354-os-x-10-8-4-update.html
http://www.tonymacx86.com/380-os-x-10-8-5-update.html
Your processor should use this:
Post Installation
6 and 8 core CPUs need a special kext called VoodooTSCSync by Cosmosis Jones of VoodooProjects. Install to /System/Library/Extensions using KextBeast or DPCIManager.
Edited for 6 core CPU with 12 Threads (IOCPUNumber=11): VoodooTSCSYNC-6core.zip
i m running 10.8.2 is perfect problem coming with 10.9 after post instation with kernal flags i thing coz in guide its says add under kernal flags ncpi=0x3000 still cant boot properly after restart its stuck on apple logo and goes black screen
Sory dear my specs on now plz can u help me with mavericks 10.9I am assuming that you are using a Gigabyte GA-X79S-UP5 motherboard? What CPU do you have. The best thing to do would be to fill out your hardware. Go to your name at the top right of screen and hover your mouse over your name, click on the 'settings' option and accurately list your Motherboard, CPU model and graphics card. We need to know what you have to offer meaningful advice.
Adrian B
Sory dear my specs on now plz can u help me with mavericks 10.9
My dear i cant make it stable after post installation thats only the problem i tried bothLOL, well now at least we all know what the hardware you have is.
Did you try the boot flags that MacMan suggested? npci=0x2000 cpus=1
next try npci=0x3000 cpus=1
Just to be clear '0' is the number zero.
Update with what you have tried since our last communication and the results.
Adrian B
Post #16 you said "i m running 10.8.2 is perfect problem coming with 10.9 after post instation with kernal flags i thing coz in guide its says add under kernal flags ncpi=0x3000 still cant boot properly after restart its stuck on apple logo and goes black screen"My dear i cant make it stable after post installation thats only the problem i tried both