[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[oreoapple]

I flash the Designare Z390.
Device is not connected, and I get 20x2

Some questions:

• Which motherboard or PCIe card was flashed? Was the Designare Z390 flashed? Or the GC-Titan Ridge?
• When you looked at System Information --> Thunderbolt, were any Thunderbolt devices connected?
  • If yes, then please disconnect all TB devices and check the Link Speed again.

 

[Inqnuam]

I flash the Designare Z390.
Device is not connected, and I get 20x2

please make a screenshot of your EFI->OC->ACPI folder

 

[CaseySJ]

I flash the Designare Z390.
Device is not connected, and I get 20x2

Have you created a custom DROM by following this guide?

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

*** Calculating CRC32_C for Designare Z390 DOES NOT MATTER *** In our haste to determine why CRC32_C was not working, we lost sight of something very important: CRC32_C applies only to the DROM bytes after byte 22. The private UID, however, is in the first 9 bytes and we can easily calculate...

www.tonymacx86.com

 

[c0c0p0ps]

do you have the full filename? The one i used was TitanRidgeNVM23-E64Fr

Yes that is the NVM23 taken from the clever folks in this thread

 

[Inqnuam]

Have you created a custom DROM by following this guide?

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

*** Calculating CRC32_C for Designare Z390 DOES NOT MATTER *** In our haste to determine why CRC32_C was not working, we lost sight of something very important: CRC32_C applies only to the DROM bytes after byte 22. The private UID, however, is in the first 9 bytes and we can easily calculate...

www.tonymacx86.com

@oreoapple If you opt for Option 1, the new procedure is:

Click to Finder icon

Select and Insert Gigabyte Z390 DESIGNARE

Download your TB SSDT with UID.

 

[davemenkehorst]

Hi! I'm trying to get WOL working. It worked with windows but i don't have a windows installation anymore.
De LEDS on the motherboard are off when power is off.
All WOL options are enabled in BIOS and "wake for network acces' is on. I'm running 10.14.6

 

[Lukey1979]

You're right -- no control messages were logged so we'll need to run WireShark again:

• First run RGB Fusion app and turn off all LEDs
• Then run WireShark and begin capturing traffic
• Now select the edge LED channel in RGB Fusion and change the color mode to static.
• Then change the color mode to pulse
• Then change the color mode to flash
• Stop the WireShark capture and upload the file

Hi Casey,

I will retry this tonight after work. To make things a little more easier I’m turning my system into a dual boot Win10 / MacOS system this afternoon so this way I don’t need to keep swapping drives in and out. I’m following your instructions as posted on the Z490 and Z390 forums. I’m using OC 0.6.0 now too so hopefully this makes things easier with dual boot. Is there anything really critical I need to do first, apart from making sure the windows SSD is in the slot closest to the CPU?

 

[CaseySJ]

Hi Casey,

I will retry this tonight after work. To make things a little more easier I’m turning my system into a dual boot Win10 / MacOS system this afternoon so this way I don’t need to keep swapping drives in and out. I’m following your instructions as posted on the Z490 and Z390 forums. I’m using OC 0.6.0 now too so hopefully this makes things easier with dual boot. Is there anything really critical I need to do first, apart from making sure the windows SSD is in the slot closest to the CPU?

After installing the Windows NVMe SSD into the M2M slot (closest to CPU) it's also advisable to format the SSD and install Windows as described in this recent note I posted in the Z490 thread:

Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

One more question: If Hotplug of USB3-Devices does not work on my Thunderbolt-Ports (USB2 works, USB3 works only if plugged in before booting) is this unrelated to thunderbolt, or could this be a sign of not properly working thunderbolt? I only have USB devices to test, no TB-device yet...

www.tonymacx86.com

 

[oreoapple]

Yes, it still shows 20x2

Have you created a custom DROM by following this guide?

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

*** Calculating CRC32_C for Designare Z390 DOES NOT MATTER *** In our haste to determine why CRC32_C was not working, we lost sight of something very important: CRC32_C applies only to the DROM bytes after byte 22. The private UID, however, is in the first 9 bytes and we can easily calculate...

www.tonymacx86.com

 

[oreoapple]

I'm using SSDT-TB-HackinDROM.aml

please make a screenshot of your EFI->OC->ACPI folder