- Joined
- Oct 14, 2012
- Messages
- 16
- Motherboard
- Gigabyte X299 AORUS Gaming 7
- CPU
- i9-7960X
- Graphics
- AMD Radeon VII
I just looked quickly at your video.
There's no SMCLightsensor in the EFI I posted. You should not see errors like this. also, The EllyBz-X299 R.kext should not create USB 2.0 errors.
Did you clean your NVRAM before booting OpenCore?
in your config.plist/ACPI:
Did you disable item No 1,2,3 ?
"SSDT-X299-RX580.aml"
"SSDT-TB3.aml" - Unless you're using a TB Card
"SSDT-X299-RMEA.aml"
Did you readjust the TSCAdjustReset.kext to your CPU "31"
@Keyboard/mouse settings: Try first to change USB ports; Mine are connected via internal USB 2.0 & BT.
You might need an extra driver for your particular Kbrd but there's also some settings in the config : UEFI/Input (Key Support, etc..Check the manual )
Inside Kernel/ Emulate; you can remove the data of Cpuid1Data & Cpuid1Mask. It is optional.
Last but not least - Check Your bios settings. Don't push to hard your CPU or memory during the first OC test runs.
Thank you so much!!! I got it working last night on Clover as I'm more familiar with that but just got it working with Open Core now!! You caught all my stupid mistakes which is so helpful. I am curious about what SSDT-DTGP.aml is. I have it enabled but am wondering if this is the USB-C/Thunderbolt onboard the mobo.
Additionally, even with following general OpenCore tutorials. I can't seem to understand if I should have these 'DeviceProperties' added to the config. I see in the tutorial that you can modify frame buffering and such, but are the ones in your config doing any onboard modifications for just helping the computer identify the hardware?
Lastly, and I've had this the whole time on my Aorus x299 Gaming 7, but when you boot up to get the Error Code onboard the motherboard 'E3'. This has been something I've seen since starting with the hackintoshes on this computer?
All the best,
Alex