- Joined
- Jul 14, 2011
- Messages
- 10
- Motherboard
- Gigabyte z370 Ultra Gaming 2.0
- CPU
- i9-9770K
- Graphics
- RX 580
- Mobile Phone
Hello fellow hackintoshers!
After having set up a working Mojave on my hack everything's gone haywire after tinkering with enabling usb ports according to the guides. Now I can't boot anything else but Windows 10. I already tried the following:
-updating BIOS several times (currently running F13)
-using all OSXAptioFix versions (2,3 2000)
-checking RAM modules (according to Windows it's ok)
-trying to boot with only the Mojave USB installer (not altered in any way, the stick worked at first to update from High Sierra to Mojave) and one SSD(crashes, see pictures)
-booting in single user and in safe mode (just ends booting capslock no longer working, sometimes restarts immediately)
I also replaced FakeSMC with VirtualSMC, but having FakeSMC remaining on my OS X backup, which I can't reach either anymore.
I either end up with a lot of +++++, stuck at couldn't allocate runtime area or at PXSX cannot assert wake from D3cold.
Normally I find the solution to my problems reading other users posts with similar problems, but now I'm giving up after 3 days straight trying to set my mashine up and running again. It really bothers me because before my attempts to perfect my hack everything went smoothly.
I'd really appreciate some help because I consider myself experienced but more on a trial-and-error base.
The attached EFI may look very crude, so please bare with me since I only can access my EFI through Windows (using diskpart) adding/deleting kexts, .efi etc.
Thank you in advance,
sVendetta
After having set up a working Mojave on my hack everything's gone haywire after tinkering with enabling usb ports according to the guides. Now I can't boot anything else but Windows 10. I already tried the following:
-updating BIOS several times (currently running F13)
-using all OSXAptioFix versions (2,3 2000)
-checking RAM modules (according to Windows it's ok)
-trying to boot with only the Mojave USB installer (not altered in any way, the stick worked at first to update from High Sierra to Mojave) and one SSD(crashes, see pictures)
-booting in single user and in safe mode (just ends booting capslock no longer working, sometimes restarts immediately)
I also replaced FakeSMC with VirtualSMC, but having FakeSMC remaining on my OS X backup, which I can't reach either anymore.
I either end up with a lot of +++++, stuck at couldn't allocate runtime area or at PXSX cannot assert wake from D3cold.
Normally I find the solution to my problems reading other users posts with similar problems, but now I'm giving up after 3 days straight trying to set my mashine up and running again. It really bothers me because before my attempts to perfect my hack everything went smoothly.
I'd really appreciate some help because I consider myself experienced but more on a trial-and-error base.
The attached EFI may look very crude, so please bare with me since I only can access my EFI through Windows (using diskpart) adding/deleting kexts, .efi etc.
Thank you in advance,
sVendetta
Attachments
Last edited: