[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[Ploddles]

@jlr

Please take a screenshot of your L/E folder and upload it. Resize it to 1024 to keep it small.

 

[CaseySJ]

Hmm my system still works fine, but the update is still failing in the same way after following your steps from a few posts back (Although after pressing any key following the error, sometimes I end up back at the BIOS boot menu and sometimes I just get a black screen). I've quadruple checked /Library/Extensions for Hackintosh kexts as listed in that micro-guide, and definitely ran sudo touch /Library/Extensions after removing them from that directory and copying the ones to CLOVER/kexts/Other that weren't there.

If the error is the same as before ("Error loading kernel cache") then let's try one more thing:

• sudo touch /System/Library/Extensions
• sudo touch /Library/Extensions
• Then reboot and log back into standard Catalina (do not run the Catalina updater). This will rebuild all kernel caches.
• Then try the system update.
• If this also fails it may be time to unlock MSR 0xE2.

 

[CaseySJ]

I followed the instructions and it worked! However, now my Bluetooth is saying it's not available. I have the Fenvi FV-T919 -- the WiFi works fine, but no Bluetooth once I followed #1. Tips for connecting.

Please run IORegistryExplorer and scroll the device tree on left side until you get to XHC. Then expand the chevrons for both HS11 and HS12 and post a screenshot.

Are you running Mojave or Catalina?

 

[atz1995]

Please run IORegistryExplorer and scroll the device tree on left side until you get to XHC. Then expand the chevrons for both HS11 and HS12 and post a screenshot.

Are you running Mojave or Catalina?

Running Mojave 10.14.6

 

[fangmngqiang]

Correct. Thunderbolt SSDT enables hot plug.
[/引用]
but my motherboard can't use SSDT for thunderbolt,when i use SSDT it can be loaded,but in PCI BUS I can't see anything,I'm sure Ior path is ture

 

[CaseySJ]

Running Mojave 10.14.6

You have a USB splitter connected to the internal F_USB header. Is the Bluetooth data cable connected to that USB splitter? This is a small cable from the Fenvi FV-T919 that should connect there.

 

[CaseySJ]

but my motherboard can't use SSDT for thunderbolt,when i use SSDT it can be loaded,but in PCI BUS I can't see anything,I'm sure Ior path is ture

Which motherboard do you have?

The Asus Z10PE-D8 WS does not have built-in Thunderbolt. Are you using an Asus Thunderbolt EX 3?

 

[atz1995]

You have a USB splitter connected to the internal F_USB header. Is the Bluetooth data cable connected to that USB splitter? This is a small cable from the Fenvi FV-T919 that should connect there.

Yes it’s connected to the splitter. It worked perfectly for months until Today when I followed the steps of powering off completely to get the UAD Apollo to re recognize.

 

[CaseySJ]

Yes it’s connected to the splitter. It worked perfectly for months until Today when I followed the steps of powering off completely to get the UAD Apollo to re recognize.

Some comments and questions:

• Is WiFi working?
• Were any files added, updated, or removed from /Library/Extensions?
• Try connecting the Fenvi Bluetooth cable directly to F_USB (after disconnecting the USB splitter). Does it make a difference?

 

[fangmngqiang]

Which motherboard do you have?

The Asus Z10PE-D8 WS does not have built-in Thunderbolt. Are you using an Asus Thunderbolt EX 3?

Asrock X299m xtreme 4 thunderbolt card is GC-ALPINE RIDGE