Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

CaseySJ said:
At least 2 of those SSDTs have built-in DTGP functions, but SSDT-DTPG is needed for the Thunderbolt Hotplug SSDT. I could combine those two into one or remove the built-in DTGP methods and reference the single external method. Will do one or the other soon.

Because we removed SSDT-AWAC and SSDT-SBUS-MCHC, only SSDT-PLUG contains a built-in DTGP method. I've externalized this method in the attached version. Would someone running OpenCore replace their existing SSDT-PLUG.aml with attached version, reboot, then run IORegistryExplorer and scroll all the way down to PR00 and check whether Plugin-Type property appears?
Click to expand...
Is this the location you mean?
It doesn't appear to show up.
Screen Shot 2020-01-21 at 10.55.26 AM.png
 
My Build
Z390 DESIGNARE |  i9 9900K |  Vega 56 8GB
manfriday said:
Is this the location you mean?
It doesn't appear to show up.
View attachment 446032
Click to expand...
Click on PR00@0 then look for Plugin-Type property on the right side. It should be listed there along with several other properties.

In the IORegistryExplorer window, devices are listed on the left side and their properties are on the right side.
 
manfriday said:
Property-list screenshot
View attachment 446039
Click to expand...
It's possible that the load-order of SSDTs matters in OpenCore. Try moving SSDT-DTPG.aml to the first position in the list (under ACPI section). This can be done by manually editing the config.plist or using drag-and-drop with OpenCore Configurator.
 
CaseySJ said:
It's possible that the load-order of SSDTs matters in OpenCore. Try moving SSDT-DTPG.aml to the first position in the list (under ACPI section). This can be done by manually editing the config.plist or using drag-and-drop with OpenCore Configurator.
Click to expand...

Ahh I may have misunderstood. I thought SSDT-PLUG was supposed to replace SSDT-DTPG.
I'll put it back, with SSDT-DTPG at the top and report back shortly.

On a side note.. I thought OpenCore Configurator was advised against as it created bad config.plist files?
Was it fixed? If so, where does one find the "good" version?
 
My Build
Z390 DESIGNARE |  i9 9900K |  Vega 56 8GB
manfriday said:
Ahh I may have misunderstood. I thought SSDT-PLUG was supposed to replace SSDT-DTPG.
Ill put it back, with SSDT-DTPG at the top and report back shortly.
Click to expand...
Right -- both SSDT-PLUG and SSDT-DTPG are needed -- but for now let's keep the order of SSDTs the same (no need to put SSDT-DTPG first). I'd like to see if order-of-appearance matters (hopefully it does not).
On a side note.. I thought OpenCore Configurator was advised against as it created bad config.plist files?
Was it fixed? If so, where does one find the "good" version?
Click to expand...
The latest version 1.13.0.0 supports OpenCore 0.5.4 and 0.5.5, but the download link has disappeared!
 
CaseySJ said:
Right -- both SSDT-PLUG and SSDT-DTPG are needed -- but for now let's keep the order of SSDTs the same (no need to put SSDT-DTPG first). I'd like to see if order-of-appearance matters (hopefully it does not).

The latest version 1.13.0.0 supports OpenCore 0.5.4 and 0.5.5, but the download link has disappeared!
Click to expand...

Plugin-Type shows up with (0x1) regardless of what position SSDT-DTPG is in.
 

Attachments

  • DSDT-Top.png
    DSDT-Top.png
    73.1 KB · Views: 113
My Build
Z390 DESIGNARE |  i9 9900K |  Vega 56 8GB
manfriday said:
Plugin-Type shows up with (0x1) regardless of what position SSDT-DTPG is in.
Click to expand...
Awesome -- thank you!

I'll update the two ZIP files in OpenCore Mini-Guide now.
 
CaseySJ said:
Thank you for providing SSDT-TbtOnPch-Designare_Draft06. Please see logs below:
Code: 
Timestamp                       (process)[PID]
2020-01-21 06:50:27.418843-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::start(IOService*)> ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.2.
2020-01-21 06:50:27.418917-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x40039854
2020-01-21 06:50:27.418972-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe00e4000
2020-01-21 06:50:27.419028-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0800000
2020-01-21 06:50:27.419082-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0900000
2020-01-21 06:50:27.419138-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0908000
2020-01-21 06:50:27.419191-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0910000
2020-01-21 06:50:27.419245-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0920000
2020-01-21 06:50:27.419297-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0a00000
2020-01-21 06:50:27.419349-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_INI Root Port"
2020-01-21 06:50:27.419401-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICMBoot"
2020-01-21 06:50:27.419456-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Tbt TWIN set to One"
2020-01-21 06:50:27.419510-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Tbt Force Power with FPG0"
2020-01-21 06:50:27.419564-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
2020-01-21 06:50:27.419617-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Delay to appear = 187 us"
2020-01-21 06:50:27.419671-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICMS"
2020-01-21 06:50:27.419724-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_0="
2020-01-21 06:50:27.419776-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xffffffff
2020-01-21 06:50:27.419829-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI called"
2020-01-21 06:50:27.419880-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI RP OK!"
2020-01-21 06:50:27.419932-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI UPSB OK!"
2020-01-21 06:50:27.419985-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 0 done"
2020-01-21 06:50:27.420037-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 3 done"
2020-01-21 06:50:27.420090-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 4 done"
2020-01-21 06:50:27.420143-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 5 done"
2020-01-21 06:50:27.420195-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI DPs done"
2020-01-21 06:50:27.420247-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI0 all done"
2020-01-21 06:50:27.420298-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI End"
2020-01-21 06:50:27.420351-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_1="
2020-01-21 06:50:27.420403-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a1
2020-01-21 06:50:27.420454-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_2="
2020-01-21 06:50:27.420506-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a1
2020-01-21 06:50:27.420558-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_3="
2020-01-21 06:50:27.420610-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a7
2020-01-21 06:50:27.420662-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800003f5
2020-01-21 06:50:27.420714-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_4="
2020-01-21 06:50:27.420766-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a7
2020-01-21 06:50:27.420817-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ISTA="
2020-01-21 06:50:27.420869-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800003f5
2020-01-21 06:50:27.420921-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configuration delay = 1004 ms"
2020-01-21 06:50:27.420972-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_L61"
2020-01-21 06:50:27.459018-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS0 RP05"
2020-01-21 06:50:27.459122-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCEU RP05"
2020-01-21 06:50:27.459188-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCEU RP05- Put upstream bridge back into D0 "
2020-01-21 06:50:27.464748-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS0 UPSB"
2020-01-21 06:50:27.465167-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCED UPSB"
2020-01-21 06:50:27.465549-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCED - enable GPIO"
2020-01-21 06:50:27.465866-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - PCI wants on"
2020-01-21 06:50:27.466288-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - NHI wants on"
2020-01-21 06:50:27.466491-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - XHCI wants on"
2020-01-21 06:50:27.466560-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - TBT forced on"
2020-01-21 06:50:27.466616-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - USB forced on"
2020-01-21 06:50:27.466672-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - TBT GPIO should be on"
2020-01-21 06:50:34.696982-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
2020-01-21 06:50:34.697280-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-01-21 06:50:34.698181-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS3 DSB0"
2020-01-21 06:50:34.698246-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0"
2020-01-21 06:50:34.698312-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "POFF DSB0"
2020-01-21 06:50:34.698375-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-01-21 06:50:34.698442-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-01-21 06:50:34.698508-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-01-21 06:50:35.708905-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- disable GPIO"
2020-01-21 06:50:35.708971-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - PCI wants on"
2020-01-21 06:50:35.709037-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - NHI wants off"
2020-01-21 06:50:35.709100-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - XHCI wants on"
2020-01-21 06:50:35.709162-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - TBT allows off"
2020-01-21 06:50:35.709224-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - USB forced on"
2020-01-21 06:50:35.709287-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - TBT GPIO should be off"
2020-01-21 06:50:35.709356-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-21 06:50:35.709419-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - Make sure TBT & USBC is on"
IOReg Screenshot:

View attachment 446003

Code: 
Timestamp                       (process)[PID]
2020-01-21 06:58:29.416875-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::start(IOService*)> ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.2.
2020-01-21 06:58:29.416942-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x40039854
2020-01-21 06:58:29.416998-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe00e4000
2020-01-21 06:58:29.417051-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0800000
2020-01-21 06:58:29.417102-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0900000
2020-01-21 06:58:29.417154-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0908000
2020-01-21 06:58:29.417208-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0910000
2020-01-21 06:58:29.417260-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0920000
2020-01-21 06:58:29.417315-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xe0a00000
2020-01-21 06:58:29.417368-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_INI Root Port"
2020-01-21 06:58:29.417422-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICMBoot"
2020-01-21 06:58:29.417476-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Tbt TWIN set to One"
2020-01-21 06:58:29.417528-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Tbt Force Power with FPG0"
2020-01-21 06:58:29.417581-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
2020-01-21 06:58:29.417632-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Delay to appear = 185 us"
2020-01-21 06:58:29.417684-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICMS"
2020-01-21 06:58:29.417737-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_0="
2020-01-21 06:58:29.417788-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0xffffffff
2020-01-21 06:58:29.417840-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI called"
2020-01-21 06:58:29.417893-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI RP OK!"
2020-01-21 06:58:29.417945-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI UPSB OK!"
2020-01-21 06:58:29.417996-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 0 done"
2020-01-21 06:58:29.418049-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 3 done"
2020-01-21 06:58:29.418100-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 4 done"
2020-01-21 06:58:29.418152-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI Dp 5 done"
2020-01-21 06:58:29.418205-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI DPs done"
2020-01-21 06:58:29.418257-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI0 all done"
2020-01-21 06:58:29.418308-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configure NHI End"
2020-01-21 06:58:29.418361-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_1="
2020-01-21 06:58:29.418412-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a1
2020-01-21 06:58:29.418464-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_2="
2020-01-21 06:58:29.418516-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a1
2020-01-21 06:58:29.418568-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_3="
2020-01-21 06:58:29.418620-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a7
2020-01-21 06:58:29.418672-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800003f5
2020-01-21 06:58:29.418724-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ICME_4="
2020-01-21 06:58:29.418776-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800001a7
2020-01-21 06:58:29.418827-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "ISTA="
2020-01-21 06:58:29.418879-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: 0x800003f5
2020-01-21 06:58:29.418932-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "Configuration delay = 1004 ms"
2020-01-21 06:58:29.418984-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_L61"
2020-01-21 06:58:29.462082-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS0 RP05"
2020-01-21 06:58:29.462430-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCEU RP05"
2020-01-21 06:58:29.462527-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCEU RP05- Put upstream bridge back into D0 "
2020-01-21 06:58:29.464283-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS0 UPSB"
2020-01-21 06:58:29.464799-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCED UPSB"
2020-01-21 06:58:29.466048-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCED - enable GPIO"
2020-01-21 06:58:29.466441-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - PCI wants on"
2020-01-21 06:58:29.466756-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - NHI wants on"
2020-01-21 06:58:36.820007-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
2020-01-21 06:58:36.820431-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-01-21 06:58:36.821307-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "_PS3 DSB0"
2020-01-21 06:58:36.821374-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0"
2020-01-21 06:58:36.821441-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "POFF DSB0"
2020-01-21 06:58:36.821504-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-01-21 06:58:36.821568-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-01-21 06:58:36.821632-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-01-21 06:58:37.824847-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "PCDA DSB0- disable GPIO"
2020-01-21 06:58:37.824913-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - PCI wants on"
2020-01-21 06:58:37.824978-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - NHI wants off"
2020-01-21 06:58:37.825042-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - XHCI wants on"
2020-01-21 06:58:37.825107-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - TBT allows off"
2020-01-21 06:58:37.825171-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - USB forced on"
2020-01-21 06:58:37.825235-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - TBT GPIO should be off"
2020-01-21 06:58:37.825300-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-21 06:58:37.825364-0800  localhost kernel[0]: (ACPIDebug) <ACPIDebug`org_rehabman_ACPIDebug::PrintTraces()> ACPIDebug: "UGIO - Make sure TBT & USBC is on"
IOReg screenshot: Device tree not fully materialized, but system is stable (no lockup) so that's a good sign.

View attachment 446005

For reference purposes, the fully materialized device tree should look like this:

View attachment 446006 View attachment 446007
Click to expand...
Slow progress ;) !

Seem to have a lack of ACPIDebug log, some information appear on one test and disappear for another... Probably due to a limited capacity of the device RMDT added for ACPIDebug feature.

Could you try to modify it like this :
Before: Name (RING, Package (0x0100){})
After: Name (RING, Package (0x1000){})
​
We can probably extend memory capacity like that.

Some issues on XHC2 (DSB2) device part power supply ! Seem that SGOV(FPG0) used by TBFP (ThunderBolt Force Power) only power-on NHI part of the device, which is maybe not the case with Alpine Ridge.. or just a different layout of GPIOs on Designare board.
It will be interesting to NOT using any SSDT-TBT, disconnecting all devices on Tbt and seeing what happen on Ioreg with GPIO3FrcPw disabled.

Little doubt with OSDW .. to be sure, I have removed all OSDW conditions used on all _PSx .. and whole others.
Please, remember to disable GPIO3FrcPw on BIOS before the following test :thumbup:

Attached updated file SSDT-TbtOnPch-Designare_Draft07.aml
 

Attachments

  • SSDT-TbtOnPch-Designare_Draft07.aml
    21.7 KB · Views: 102
Hi. I've notice now that CPU temperature is 90ºC from startup.

Is the measure wrong or really is CPU overheat? What is the way to diagnose the problem? Thank you!
 

Attachments

  • IMG_20200121_184750422.jpg
    IMG_20200121_184750422.jpg
    2.5 MB · Views: 82
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top