- Joined
- Mar 17, 2016
- Messages
- 22
- Motherboard
- Lenovo Y520
- CPU
- i5-7300HQ
- Graphics
- HD 630, GTX 1050
No "Problem Reporting" files attached.
No "Problem Reporting" files attached.
it's config_install.plist, can't boot with config_y520.plist, black screen.Your config.plist is missing basic required renames (such as GFX0->IGPU).
No expectation that the PNLF code in scope IGPU (in SSDT-Y520.aml) can work without it.
can't boot with config_y520.plist, black screen.
You will need to attach PR files that represent the problem scenario.
Use an external monitor or remote desktop to collect the required files.
And you might want to avoid patching the portcount to 1 (I'm looking at framebuffer-portcount property you're injecting).
Yes,teamviewer,change lid and legacy boot no help.Were these files collected with a remote desktop?
I ask because I see only display detected is the internal display (and EDID detected also).
Your profile is missing details. Please put your screen resolution in Graphics as requested in the FAQ (I can see from your EDID that it is 1920x1080).
And you might want to avoid patching the portcount to 1 (I'm looking at framebuffer-portcount property you're injecting).
You have legacy boot/CSM enabled in BIOS?
Did you try closing the lid and opening it?
Did you try other ig-platform-id values?
Did you try removing port-count property from config.plist/Devices/Properties... like RehabMan suggested in post #247.Yes,teamviewer,change lid and legacy boot no help.