Contribute
Register

[Guide] Dell XPS 15 9560 - High Sierra 10.13.2

Status
Not open for further replies.
xCatbodi said:
My sleep would work with MacBookPro14,3, it would turn off the computer after about 5-10 seconds. I haven't been able to get sleep working now with MacBookPro14,1 when either sleeping with lid or using Apple Logo > Sleep, the screen goes black but still lit and remains on. Nothing is plugged into the computer and I wait for minutes but still remains on.
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Second build
Z370 HD3P |  i7 8700K |  RX 580 Armor

Attachments

  • debug_17748.zip
    1.6 MB · Views: 115
xCatbodi said:
Attached.
Click to expand...

You have apps running that are using audio, preventing sleep.
It is easy to see in your pmset -g assertions:
Code: 
PMSET DUMP :-
System-wide power settings:
Currently in use:
 standbydelay         10800
 standby              1
 womp                 0
 hibernatefile        /var/vm/sleepimage
 powernap             0
 halfdim              1
 networkoversleep     0
 disksleep            0
 sleep                0 (sleep prevented by Coca, coreaudiod, firefox)
 autopoweroffdelay    28800
 hibernatemode        3
 autopoweroff         1
 ttyskeepawake        1
 displaysleep         30 (display sleep prevented by coreaudiod, firefox)
 tcpkeepalive         1
 lidwake              1
END DUMP FOR PMSET
 
nugget28 said:
You are awesome! Thanks for your help buddy!

I grabbed the latest files, copied clover over (generated the new ID) and installed the kexts and all appears to be good!!

Audio appears to be working off the bat as well. Im not going to put an internal WiFi card in, so now to figure out which one to get then its all sorted.

I believe i was missing the part to actually install the kext's and just assumed that they only needed to be in the clover folder.

Thanks again!
Click to expand...

Could you attach your Clover folder? I would like to see the modifications you have made to succeed.

If anyone else can help, I have had graphic problems.

I can only boot using a generic ig-platform-id (0x12345678), but I notice an error during boot ("Graphics driver failed to load: could not register with framebuffer driver"), I'm having a lot of display flickering (particularly on Chrome) and my graphics appears as Intel HD Graphics 630 31mb.

With the Clover Folder provided in this guide (same thing happens with the clover folder from guide referred to by slyon) I get stucked in gIOScreenLockState 3.

Here's my clover folder attached.


PS: noted that MacBookPro14,3 is a poor choice, but since not being able to have graphics work with any other choice, I kept this.


EDIT: Would my mistake be on installing kexts? I've done it with Kext Wizard, if there's any other guide for it, would be welcome as well.
 

Attachments

  • CLOVER.zip
    5.1 MB · Views: 92
Last edited:
@RehabMan I have some problems with same laptop, as per this thread.

After several days of trying, using this guide and several others guides on tonymac, I managed to get more or less stable system.
Basically, I just downloaded EFI folder from guide and did some minor modification to clover config.plist to make Intel video working. For wireless I am using both DW1560 and DW1830. My SMBIOS is MAcbook14,3 because it's only way to have sleep working, partially. For boot drive I am using NVME SSD. I have the following problems:

-because of MB14,3 I have to wait several seconds to enter system password + some apps using TouchID are buggy. If I change to MB14,1 etc then no sleep.
-reboot/panic after long sleep, sometimes not immediately, after working for 15-20 min
-bluetooth issue. When I use DW1830 - not available after battery wake, only on AC wake. DW1560 sometime not available after wake, it shows up as 2 similar adapters is system profiler
-usb-c 3.1/thunderbolt port working only after reboot, not working after sleep
-no HDMI video output

Can you kindly guide me? Thank you.
 

Attachments

  • Archive.zip
    21.9 MB · Views: 128
by-ally said:
@RehabMan I have some problems with same laptop, as per this thread.

After several days of trying, using this guide and several others guides on tonymac, I managed to get more or less stable system.
Basically, I just downloaded EFI folder from guide and did some minor modification to clover config.plist to make Intel video working. For wireless I am using both DW1560 and DW1830. My SMBIOS is MAcbook14,3 because it's only way to have sleep working, partially. For boot drive I am using NVME SSD. I have the following problems:

-because of MB14,3 I have to wait several seconds to enter system password + some apps using TouchID are buggy. If I change to MB14,1 etc then no sleep.
-reboot/panic after long sleep, sometimes not immediately, after working for 15-20 min
-bluetooth issue. When I use DW1830 - not available after battery wake, only on AC wake. DW1560 sometime not available after wake, it shows up as 2 similar adapters is system profiler
-usb-c 3.1/thunderbolt port working only after reboot, not working after sleep
-no HDMI video output

Can you kindly guide me? Thank you.
Click to expand...

"Problem Reporting" files are wrong (21mb is too large for requested PR files).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
RehabMan said:
"Problem Reporting" files are wrong (21mb is too large for requested PR files).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
Click to expand...

Ok, checked that script. Now attaching updated report. Seems that I attached extra files from EFI folder, though I eliminated themes folder. Please check now.
 

Attachments

  • Archive.zip
    2.1 MB · Views: 119
When I try to run the Clover installer, I get stuck at the "MACH Reboot" error. Please advise? Problem Files include EFI used and photo of verbose code. Thank you.
 

Attachments

  • Problem Files.zip
    6.1 MB · Views: 108
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top