RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,008
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Hi Thiago,
Hi Rehabman,
I'm unable to get the installer running with the instructions provided. I've tried the following:
I've checked the attached guide by Rehabman as much as possible, and have done the below BIOS changes, besides DEP, wasn't able to find that:
- running with / without config.plist in installer
- running with / without default kexts in other + of course provided ones
- "VT-d" (virtualization for directed i/o) should be disabled if possible (the config.plist includes dart=0 in case you can't do this)
- "DEP" (data execution prevention) should be enabled for OS X
- "secure boot " should be disabled
- "legacy boot" optional (recommend enabled, but boot UEFI if you have it)
- "CSM" (compatibility support module) enabled or disabled (varies) (recommend enabled, but boot UEFI)
- "fast boot" (if available) should be disabled.
- "boot from USB" or "boot from external" enabled
- SATA mode (if available) should be AHCI
Suspecting a ACPI error, but I'm unsure how to fix it. Would be very thankful for any support given. Thanks in advance!
Your EFI/Clover is not per guide.
Read here:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/