[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

[RehabMan]

hi ,this is the gendebug sh zip files ,please look at it
thanks very much

No ioreg attached. Please read "problem reporting" carefully.

 

[warrybl]

here is the ioreg file

 

[RehabMan]

hi ,this is the gendebug sh zip files ,please look at it
thanks very much

here is the ioreg file

You did not follow the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[warrybl]

hi ,excuse all my mistakes,so i follow the guid ,i instal el capitain with a wrong platform id because with the wright one it doesn t boot,screen is flaching and abort instal.
now i steel have 7mb but my hd4200 is recognise,good,i make the shdebug and ioreg copy ,all is in the zip file

 

[RehabMan]

hi ,excuse all my mistakes,so i follow the guid ,i instal el capitain with a wrong platform id because with the wright one it doesn t boot,screen is flaching and abort instal.
now i steel have 7mb but my hd4200 is recognise,good,i make the shdebug and ioreg copy ,all is in the zip file

You cannot expect working graphics when using an invalid ig-platform-id (your ioreg shows 0x12345678).
Also, you do not have the correct kexts installed.
FakePCIID_HD4600_HD4400.kext was deprecated long ago.
Use FakePCIID.kext + FakePCIID_Intel_HD_Graphics.kext (current versions).

 

[warrybl]

i add this twoo fakepciid current version,and set the good platform id but no booting,screen flashing two times and nothing

 

[RehabMan]

i add this twoo fakepciid current version,and set the good platform id but no booting,screen flashing two times and nothing

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, please fill out your profile with laptop hardware details as per FAQ. Before your next reply.

 

[warrybl]

it s done,the new gendebug sh complet ,here it s,so for resume i install elcapitain without the right platform id because it do not boot with, i follow the guid :
In case you cannot boot with a valid ig-platform-id (may need to inject EDID, or patch IOKit/CoreDisplay when you have a 4k display, or other problems), use an invalid ig-platform-id (0x12345678) and deal with the graphics issue at post-install.

i try with fakepciid and fakepciidintelhd...with the good id platform ...but do not boot;

 

[RehabMan]

it s done,the new gendebug sh complet ,here it s,so for resume i install elcapitain without the right platform id because it do not boot with, i follow the guid :
In case you cannot boot with a valid ig-platform-id (may need to inject EDID, or patch IOKit/CoreDisplay when you have a 4k display, or other problems), use an invalid ig-platform-id (0x12345678) and deal with the graphics issue at post-install.

i try with fakepciid and fakepciidintelhd...with the good id platform ...but do not boot;

Your profile is not filled out correctly. Do not use the signature. Use only the three profile fields (Mobo/CPU/Graphics), and provide all seven details requested:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

You cannot expect working graphics using an invalid ig-platform-id.

Keep in mind that ACPIBacklight.kext does not work on 10.12.4 and later. I have no idea why you installed it.

Also, you do not have the correct FakePCIID kexts installed (as already mentioned earlier).

 

[warrybl]

i use invalid ig platform id because i can t boot whith the valid ig plateform id,now i use the fakepciid from you ,RehabMan-FakePCIID-2017-1215 ,i try the ACPIbaklightcontrol because i m in 10,11,2 and i v no brigntness control (i hidde it now),i can t boot the os with this two fakepciid (fakepciid and fakepciidintelgraphics) i try with the debug and realase version with no result.what can i do?
i joint my new gendebug-sh