- Joined
- Apr 10, 2017
- Messages
- 15
- Motherboard
- GA-Z170-HD3
- CPU
- Intel i5 6500
- Graphics
- Builtin HD-530
- Mobile Phone
The new high Sierra USB port raise patch doesn't work for the USB installer on Beta 3 for some USB ports. However relocating the installer USB stick to a different port allows the installation to proceed. The port raise patch does work on all ports however once beta 3 is installed. This is not a problem in Sierra.
What gives?
In any event, the installation goes great. Since Nvidia hasn't released beta drivers, I have Dual monitor support on Intel KBL 530 HD at 2560x1440. I had to apply a few patches for this to work since leaving the ports to the default Displayport mode in return causes the monitor to max out at a resolution below 1440p. iMessage is working! Sound works using voodoohda.kext.
NVME finally works natively (surprising move by Apple! Is this a nod to hackintosh users or is apple planning to support modular installations in the future?) my m.2 drive reads at 2200 MB/sec and writes at 1400 MB/sec. In a later test, I'll see if the system will boot from NVME.
Sleep doesn't work using native KBL Intel 530 graphics. and handoff using a gmyle USB 4.0 dongle doesn't work. Is there a way to make handoff work with 3rd party USB dongles?
USB ports are working fine on my GA Z170HD3 with i5 6500. Have to use USBInjectAll.kext and USB patch for
com.apple.driver.usb.AppleUSBXHCIPCI
AppleUSBXHCIPCI
and use SMBIOS iMac14,2; other i.e. 17,1 or 18,2 showing problem with USB 3 ports.
HD530 working just fine using patch for
AppleIntelSKLGraphicsFramebuffer
See the attachment.